|
Re: [NV-L] Email Rule for Windows
2006-09-23 08:04:45
Ronnie,
The thing to do here is narrow down
the problem by tracing nvcord. Did you select all the tracing options
when you used serversetup on Windows to have him run your rule? if
not do that now, and restart him. Then generate a test event and
see what it says in his log. If you are already doing the tracing,
then go look at the log now. With all the tracing tuned on you should
see everything that nvcord was with your triggering event. There
are eyecatchers in the trace, "Received and event" and "Finished
with the trap" and between them is what nvcord did with each event.
You should see whether your nvmail command is being triggered or
not. That will tell you whether it's a ruleset problem or nvmail
problem.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Network Availability Management
Network Management - Development
Tivoli Software, IBM Corp_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|
|
|
