RE: [nv-l] Unreachable Nodes..
2004-03-23 13:19:44
Raymond,
SmartSet: ProblemNodes
Description: Marginal or Critical Nodes
Rule: ((('IP Status'='Marginal') || ('IP Status'='Critical')) &&
(('isUn
reachable'=True) || ('isNode'=True)))
Thanks, Dave
"Erdey, Raymond M"
<[email protected] T
om> To: <nv-l AT lists.us.ibm
DOT com>
cc:
Sent by:
owner-nv-l AT lists.us DOT ibm bcc:
.com Subject:
RE: [nv-l] Unreachable Nodes..
03/23/2004 10:56 AM
Please respond to nv-l
Dave,
Please run the following command and send the output to a file and send
that to the list:
/usr/OV/bin/nvUtil g SmartSetName
Where "SmartSetName" is the name of your smartset that you described
bellow.
Raymond Erdey
Enterprise Rent-A-Car
System Administrator
Network Management System Administration
Email: raymond.m.erdey AT erac DOT com
Web: http://www.geocities.com/rerdey/
-----Original Message-----
From: owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT
com]On
Behalf Of reamd AT nationwide DOT com
Sent: Tuesday, March 23, 2004 9:19 AM
To: nv-l AT lists.us.ibm DOT com
Subject: [nv-l] Unreachable Nodes..
Hi All,
I have a smartset that has marginal and critical and
Unreachable Nodes - Definition 1: 'Ip status'='Marginal' or Definition 2:
'Ip status'='Critical' And Definition 3: 'isUnreachable' = True
Definition 4: 'isNode' =True. The marginal and critical nodes show up in
this smartset but not the Unreachable ones. If I change Definition 4: to
'isNetwork'=True, the test will find all including the unreachable. Am I
doing something wrong? Can you tell me how to get this to work? Thansk,
Dave
AIX 5.1
7.1.4
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [nv-l] Unreachable Nodes.., reamd
- RE: [nv-l] Unreachable Nodes.., Erdey, Raymond M
- RE: [nv-l] Unreachable Nodes..,
reamd <=
- RE: [nv-l] Unreachable Nodes.., Davis, Donald
- RE: [nv-l] Unreachable Nodes.., reamd
- RE: [nv-l] Unreachable Nodes.., Barr, Scott
- RE: [nv-l] Unreachable Nodes.., Barr, Scott
- RE: [nv-l] Unreachable Nodes.., reamd
|
|
|