nv-l
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: [nv-l] exporting DISPLAY (AIX) via VPN

2004-03-02 11:23:26
Subject: RE: [nv-l] exporting DISPLAY (AIX) via VPN
From: "Barr, Scott" <Scott_Barr AT csgsystems DOT com>
To: <nv-l AT lists.us.ibm DOT com>, <nv-l AT lists.tivoli DOT com>
Date: Tue, 2 Mar 2004 10:07:26 -0600
I'm on solaris but I use Cisco's VPN client all the time.
 
I do a "who" command to find my own IP address and export that as the display. Sounds like you should be working.
-----Original Message-----
From: owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT com]On Behalf Of Caballero, Herman - Herman E
Sent: Tuesday, March 02, 2004 9:58 AM
To: nv-l AT lists.tivoli DOT com
Subject: [nv-l] exporting DISPLAY (AIX) via VPN

Has any one had problems exporting the Display in AIX to be able to start the gui (Netview) via VPN?  If so, how did you get around it?

I can’t seem to do it from home.  I’ve just acquired cable modem.

Thanks,

Herman E. Caballero
 

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [nv-l] exporting DISPLAY (AIX) via VPN, Caballero, Herman - Herman E
Next by Date:  RE: [nv-l] exporting DISPLAY (AIX) via VPN, Klingensmith, Debra L.
Previous by Thread:  Re: [nv-l] exporting DISPLAY (AIX) via VPN, George deSocio
Next by Thread:  RE: [nv-l] exporting DISPLAY (AIX) via VPN, Klingensmith, Debra L.
Indexes:  [Date] [Thread] [Top] [All Lists]