nv-l
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: [nv-l] Switch Port monitoring

2003-02-25 17:22:49
Subject: RE: [nv-l] Switch Port monitoring
From: "Qureshi, Fawad" <Fawad.Qureshi AT ssa DOT gov>
To: nv-l AT lists.tivoli DOT com
Date: Tue, 25 Feb 2003 16:41:48 -0500
An addendum:
 
I ask for the deleted ports (e.g. s0/0.1 is deleted/down) because these deleted ports are showing up, and I want to isolate them.  There are hundreds of sites like this because of an on-going PVC redefinition project. Thanks.
 
Fawad
-----Original Message-----
From: Qureshi, Fawad [mailto:Fawad.Qureshi AT ssa DOT gov]
Sent: Tuesday, February 25, 2003 4:04 PM
To: nv-l AT lists.tivoli DOT com
Subject: [nv-l] Switch Port monitoring

Netview 7.1.3 on AIX 4.3.3

Hi,

I was wondering if there is a white paper or any other good document that talks about monitoring Cisco Routers and Switches using Netview. Best practice and such. Shed some light on what to expect (which traps etc.) when certain things like a port being deleted from a switch, a sub-interface on a router going down/deleted, user workstation hanging off a switch port being rebooted etc. happen.

Cheers,

Fawad Qureshi

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [nv-l] Linux SNMP agent problem, Todd H.
Next by Date:  [nv-l] DFM MIB load in Netview, Carlos Enriquez
Previous by Thread:  [nv-l] Switch Port monitoring, Qureshi, Fawad
Next by Thread:  Re: [nv-l] Switch Port monitoring, bill . kellam
Indexes:  [Date] [Thread] [Top] [All Lists]