On your older system, look at the barcode rules you had in effect and copy
them to the new system.  It looks like you're using the last 6 characters on
the new system whereas you were using the first 6 on the old.

See
http://www.symantec.com/business/support/index?page=content&id=HOWTO34022

   .../Ed

Ed Wilts
Mounds View, MN
ewilts AT ewilts DOT org

-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of skylane
Sent: Sunday, November 14, 2010 10:12 AM
To: VERITAS-BU AT MAILMAN.ENG.AUBURN DOT EDU
Subject: [Veritas-bu] importing images - media ID problem

Hi all,

I have this issue, just finished installing a new NBU 6.5.6 on Win server
2008 R2 with a new robot HP MSL G3 Series FC tapes LTO4.
Backup are working good via NDMP.
I'm trying to import media from my older system NBU 6.0 LTO2 and I have a
mismatch between the media ID the system reads and ID on the media itself
and when trying to run phase one of the import I get error 176

" - begin Import
11/11/2010 15:21:51 - Error bptm(pid=5920) Media mounted has media id of
PT1051, but 1051L2 was requested.  Must add PT1051 to Media Manager volume
database and retry.
11/11/2010 15:21:51 - Error bpimport(pid=6904) Status = cannot perform
specified media import operation.     
11/11/2010 15:21:51 - end Import; elapsed time: 00:01:11
cannot perform specified media import operation(176)


How can I change the media ID or change the way the robot reads the ID from
the media


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu