Found the issue, if there is a single tape in your list that is not in the 
robot, the eject will fail.

On Wed, 22 Jul 2009, Justin Piszcz wrote:

> Hello,
>
> I have used the same syntax from 5.1->6.0MPX and never had a problem:
>
> $ sudo /usr/openv/volmgr/bin/vmchange -h backup-host -api_eject -map any -res 
> -ml 
> C10666:C04731:C10506:C01438:C03726:C04107:C02069:C01829:C04453:C03791:C10958:C03838:C03635:C03787:C10312:C10151:C10585:C07186:C07468
>  -rt ACS -rn 0 -rh media-server-with-drives-in-acsls-robot
>
> But now I get:
> Control daemon connect or protocol error (224)
>
> In the volmgr/debug logs:
> 05:48:05.758 [26903] <2> eject_acs_volumes: Sending cmd C10666 C04731 C10506 
> C01438 C03726 C04107 C02069 C01829 C04453 C03791 10 0 0, wait = 0
> 05:48:05.758 [26903] <2> eject_acs_volumes: Sending cmd C10958 C03838 C03635 
> C03787 C10312 C10151 C10585 C07186 C07468 x 9 1 0, wait = 0
> 05:48:05.781 [26903] <16> eject_acs_volumes: robot information failed, 
> Control daemon connect or protocol error
>
> I have a case open with Symantec and it seems like a vm.conf issue but this
> has not been an issue in the past, has anyone experienced any problems
> ejecting tapes from 5.1/6.0MPX to 6.5.x using an ACSLS robot?
>
> Justin.
>
>
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu