[Veritas-bu] error 13 on ndmp

Yes. I get good backups.  The error 13 moves around
and is not consistent on any one stream.  It seems to
happen more and fulls, and seems to have lot after
going from 4.5 FP3 to 5.0GA.

--- David Turner <Dturner AT manh DOT com> wrote:

> Hey Jerry with the current configuration in place
> were you able to get a
> successful backup of the Netapp at any time in the
> past?? If so did
> anything change (software or hardware)? 
> 
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On
> Behalf Of Jerry
> Sent: Tuesday, February 01, 2005 9:10 AM
> To: len boyle; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: Re: [Veritas-bu] error 13 on ndmp
> 
> The interesting thing is it looks like from the
> netapp
> side the ndmp is going ok.  The tape drives are
> attached to the netbackup host, not the netapp.
> 
> Here is the relevant section of the netapp "backup"
> log.  Looks like it ended twice with 696MB which is
> about the right size for that directory.  The only
> indication of an error is the bperror log and job
> status of 13.
> 
> dmp Sun Jan 30 16:35:26 EST /vol/vol2/blah(0)
> Snapshot
> (snapshot_for_backup.702, Sun Jan 30 16:35:24 EST)
> dmp Sun Jan 30 16:35:26 EST /vol/vol2/blah(0) Start
> (Level 0, NDMP)
> dmp Sun Jan 30 16:35:53 EST /vol/vol2/blah(0)
> Phase_change (I)
> dmp Sun Jan 30 16:35:53 EST /vol/vol2/blah(0)
> Tape_open (ndmp)
> dmp Sun Jan 30 16:38:08 EST /vol/vol2/blah(0)
> Phase_change (II)
> dmp Sun Jan 30 16:38:37 EST /vol/vol2/blah(0)
> Phase_change (III)
> dmp Sun Jan 30 16:41:21 EST /vol/vol2/blah(0)
> Phase_change (IV)
> dmp Sun Jan 30 16:43:12 EST /vol/vol2/blah(0)
> Phase_change (V)
> dmp Sun Jan 30 16:43:17 EST /vol/vol2/blah(0) End
> (696
> MB)
> dmp Sun Jan 30 16:43:17 EST /vol/vol2/blah(0)
> Tape_close (ndmp)
> dmp Sun Jan 30 18:50:05 EST /vol/vol2/blah(2)
> Options
> (b=0, u)
> dmp Sun Jan 30 18:50:05 EST /vol/vol2/blah(2)
> Snapshot
> (snapshot_for_backup.710, Sun Jan 30 18:50:02 EST)
> dmp Sun Jan 30 18:50:05 EST /vol/vol2/blah(2) Start
> (Level 0, NDMP)
> dmp Sun Jan 30 18:50:35 EST /vol/vol2/blah(2)
> Phase_change (I)
> dmp Sun Jan 30 18:50:35 EST /vol/vol2/blah(2)
> Tape_open (ndmp)
> dmp Sun Jan 30 18:53:17 EST /vol/vol2/blah(2)
> Phase_change (II)
> dmp Sun Jan 30 18:53:45 EST /vol/vol2/blah(2)
> Phase_change (III)
> dmp Sun Jan 30 18:56:07 EST /vol/vol2/blah(2)
> Phase_change (IV)
> dmp Sun Jan 30 18:57:18 EST /vol/vol2/blah(2)
> Phase_change (V)
> dmp Sun Jan 30 18:57:21 EST /vol/vol2/blah(2) End
> (696
> MB)
> dmp Sun Jan 30 18:57:21 EST /vol/vol2/blah(2)
> Tape_close (ndmp
> 
> --- len boyle <len.boyle AT sas DOT com> wrote:
> 
> > Hello Jerry
> > 
> > I am not sure where the Error 13 came from.
> > 
> > Can you tell us a little more. Is the tape drive
> > that this backup used 
> > attached to a netapp? To the netapp with the src
> > data?
> > 
> > You might want to look at the messages log on the
> > netapp 
> > /vol/vol0/etc/messages
> > 
> > If you have ndmp debugging turned on you can look
> in
> > the ndmplogs (I may 
> > have a typo in this name) see the netapp ndmpd
> > command to set debug levels.
> > 
> > There are also ndmp logs on netbackup, but I would
> > look at the netapp logs 
> > first.
> > 
> > len
> > ----- Original Message ----- 
> > From: "Jerry" <juanino AT yahoo DOT com>
> > To: <veritas-bu AT mailman.eng.auburn DOT edu>
> > Sent: Monday, January 31, 2005 12:38 PM
> > Subject: [Veritas-bu] error 13 on ndmp
> > 
> > 
> > > Anyone have any ideas on the cause for Error 13
> on
> > an
> > > NDMP backup.  The netapp logs appear to show the
> > > ndmp/snapshot occuring normally, but the
> Activity
> > > monitor  doesn't show the error'd job.  The
> > bperror
> > > command does, but it's unclear as to the cause. 
> > Using
> > > NB 5.0GA
> > >
> > > 01/30/2005 18:47:14 nh01srs -  cannot read from
> > media
> > > socket 8
> > > 01/30/2005 18:47:14 nh01srs nasa01  backup of
> > client
> > > nasa01 exited with status
> > >                    13 (file read failed)
> > >
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail - Helps protect you from nasty
> > viruses.
> > > http://promotions.yahoo.com/new_mail
> > > _______________________________________________
> > > Veritas-bu maillist  - 
> > Veritas-bu AT mailman.eng.auburn DOT edu
> > >
> >
>
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > > 
> > 
> > 
> > _______________________________________________
> > Veritas-bu maillist  - 
> > Veritas-bu AT mailman.eng.auburn DOT edu
> >
>
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > 
> 
> 
> 
>       
>               
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Mail - You care about security. So do we. 
> http://promotions.yahoo.com/new_mail
> _______________________________________________
> Veritas-bu maillist  - 
> Veritas-bu AT mailman.eng.auburn DOT edu
>
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 
> _______________________________________________
> Veritas-bu maillist  - 
> Veritas-bu AT mailman.eng.auburn DOT edu
>
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com