[Veritas-bu] Is there any command to deactive all jobs...
2004-08-05 11:47:17
Subject: |
[Veritas-bu] Is there any command to deactive all jobs... |
From: |
scott.kendall AT hospira DOT com (Kendall, Scott APX) |
Date: |
Thu, 5 Aug 2004 10:47:17 -0500 |
Windows GUI... Windows Administration Console
- Scott
-----Original Message-----
From: Tim Hoke [mailto:thoke AT northpeak DOT com]
Sent: Thursday, August 05, 2004 9:03 AM
To: Kendall, Scott APX
Cc: veritas-bu
Subject: RE: [Veritas-bu] Is there any command to deactive all jobs...
I checked this out for 5.0 (I'm on Solaris with 5.0_2_M)....
CLI works fine: 'bpconfig -tries 0'
The GUI (jnbSA) reflects this change just fine as well. The GUI also
allows me to change it from 0 to 1, apply, then change it back to 0 just
fine.
What Platform/Patch/GUI are you using that's not working?
-Tim
On Wed, 4 Aug 2004, Kendall, Scott APX wrote:
> Yeah, until you go to 5.0.
>
> I complained because the GUI no longer lets you set 0 tries. They told me
> it was by design... why would anybody want to use something less than 1?
>
> Obviously, they don't have to manage NetBackup and have never had to
> troubleshoot an issue and wanted none of the jobs to start while doing
so...
> and since stopping bprd will keep the GUI from starting, which is kind of
a
> pain sometimes, that leaves deactivating all Policies according to the
> support tech.
>
> I haven't tried editing the config file directly or using CLI to change it
> to see if that still allows it.
>
> Support suggested submitting a feature enhancement to get it put back
in...
> funny, you have to request a "new" feature to get something put back in
that
> until recently has been in there for many versions and years.
>
>
> - Scott
>
> -----Original Message-----
> From: King, Cheryl [mailto:cheryl.king AT intrado DOT com]
> Sent: Tuesday, August 03, 2004 2:09 PM
> To: Asiye Yigit; veritas-bu
> Subject: RE: [Veritas-bu] Is there any command to deactive all jobs...
>
> I have changed the host properties for the master server for Schedule
backup
> attempts to 0 tries (in the Admin Console). That works.
>
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Asiye
> Yigit
> Sent: Tuesday, August 03, 2004 12:13 PM
> To: veritas-bu
> Subject: [Veritas-bu] Is there any command to deactive all jobs...
>
>
>
> Hi,
>
> We will upgrade NB4.5MP5 to NB5.1. During this upgarde procedure,
> I mean after upgrading netbackup master server, we would not want jobs
> to start automatically (there are some
> jobs, we need to break/cancel before the upgrade. After this upgrade,
> these jobs can be enter the queue).
> There are lots of policies. so, it is so tedious to take all policy to
> in a deactivated state.
> During the media servers or client upgrade, I think netbackup master
> server deamon must be open.
> The way may be stopping bprd daemon because it is responsible to
> activate bpsched deamon.
>
> i am searching if it is necessary or whether there is a command to
> deactivate
> all jobs and after the procedure, active all of them.
>
> Regards,
>
> Asiye Yigit
>
>
>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] Is there any command to deactive all jobs..., Asiye Yigit
- [Veritas-bu] Is there any command to deactive all jobs..., Stump, Robert (Contractor) (DRMS)
- [Veritas-bu] Is there any command to deactive all jobs..., King, Cheryl
- [Veritas-bu] Is there any command to deactive all jobs..., Kendall, Scott APX
- [Veritas-bu] Is there any command to deactive all jobs..., BeDour, Wayne
- [Veritas-bu] Is there any command to deactive all jobs..., Lee, Kenneth
- [Veritas-bu] Is there any command to deactive all jobs...,
Kendall, Scott APX <=
- [Veritas-bu] Is there any command to deactive all jobs..., Kendall, Scott APX
- [Veritas-bu] Is there any command to deactive all jobs..., Mark.Donaldson AT cexp DOT com
- [Veritas-bu] Is there any command to deactive all jobs..., ChrisCosta AT tdwaterhouse DOT com
- [Veritas-bu] Is there any command to deactive all jobs..., Kendall, Scott APX
|
|
|