Veritas-bu

[Veritas-bu] 9940B st.conf entrie

2003-11-26 07:13:56
Subject: [Veritas-bu] 9940B st.conf entrie
From: gmackinn AT ford DOT com (MacKinnon, G. R. (Gregory))
Date: Wed, 26 Nov 2003 07:13:56 -0500
Robert_Thelen AT bankone DOT com wrote:

> I had opened up a case with Veritas about this back in March.  This is 
> what I was told:
>
>   I've found a few dozen cases in which both StorageTek 9840 and 
> T9840B tape
>   drives were used.  In each situation we've recommended identical 
> options-bit
>   configurations for the st.conf file, as in the following example 
> (note the
>   punctuation):
>
>   tape-config-list=
>   "STK     9840",  "STK 1/2 Inch Cartridge (9840)",  "STK-9840",
>   "STK     T9840B", "STK 9840 ver b Tape Drive", "STK_T9840B";
>   STK-9840   = 1,0x39,0,0x1d639,1,0x00,0,
>   STK_T9840B = 1,0x36,0,0x1d639,1,0x00,0;
>
> I have implemented this and it seems to work.  The punctuation is very 
> important.
>
> Rob Thelen
> Storage Management
> Bank One Card Services.
>
>
> -----Original Message-----
> From: Nash, Ebon [mailto:Ebon_Nash AT compuware DOT com]
> Sent: Tuesday, November 25, 2003 2:06 PM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] 9940B st.conf entrie
>
>
> Can some please tell me the Veritas recommended st.conf entry for the
> STK9940B drive?
>
> Ebon Nash
> Enterprise Storage Administrator
> Compuware Corporation
> 31440 Northwestern Hwy.
> Farmington Hills, MI  48334
> (248) 737-7300
>
The 9940b entry is different. I think I got it from the STK
website.

"STK     T9940B",       "StorageTek 9940B",             "STK_9940B"; 
<-That's a semi-colon
                                                                        
                                             or comma, depending
                                                                        
                                            on whether next entry is
                                                                        
                                            uncommented.

STK_9940B       =       
2,0x39,0,0x18619,4,0x0,0x44,0x44,0x44,0,0,240,0,10800,0,0,12600;


There is also a Solaris patch, 108725-xx. Then it'll show up as 9940b w/ 
mt commands.

Gregg

=================================================================
Gregg MacKinnon                         Ford Motor Co.
gmackinn AT ford DOT com                        2101 Village Rd. 
Technical Computing Section             Rm 1116, MD 1076        
(313) 594-3716   pager 7958343          Dearborn Michigan, 48124
==================================================================              
                                        



<Prev in Thread] Current Thread [Next in Thread>