Re: [Networker] Network 6.0.1 autochanger issue
2013-08-15 12:41:56
When I read this something about needing the Power Edition license to
run high speed tape drives popped into my head. Could the AIT-2 drives be
considered high speed? Also seem to remember something about needing the
Power Edition to support Jukeboxes greater than X slots.
I'd look and see if you have a Power Edition enabler. Been a lot of years
so all this is FWIW.
On Mon, Aug 12, 2013 at 5:24 PM, splat <networker-forum AT backupcentral DOT
com>wrote:
> Yes I know its old really old . But I just walked into this job and this
> is what they are using for backus, yes I want to upgrade but for now
> getting a good back up of the data is top priority . so I fired up there
> Networker server and there were no Licenses installed. well after half an
> hour of digging through Papers I found a Printopug with Enablers and auth
> Codes. I punched them all in and and they took and everything got happy .
> to a point.
>
> when ever I try to do something I get the error "Jukebox not supported ,
> Upgrade required"
>
> its a 40 Slot Box , and the autochanger license if for 64 slots so I have
> enough on the licenses.
>
> any Ideas ?
>
> JJG
>
> +----------------------------------------------------------------------
> |This was sent by jgoeller AT intrinsix DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
|
|
|