Networker

Re: [Networker] Networker using only one volume/device at the time, why?

2010-11-25 12:34:17
Subject: Re: [Networker] Networker using only one volume/device at the time, why?
From: "Terveen, Frank" <Frank.Terveen AT AFM DOT NL>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Thu, 25 Nov 2010 18:32:13 +0100
Sounds like a thing with parallelism and max session to check ?
------Original Message------
From: =sasha=
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
ReplyTo: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Networker using only one volume/device at the time, why?
Sent: 25 Nov 2010 10:18

We are using NetWorker version 7.4.4.Build.634, it is running on Solaris 9, has 
one adv_file device with mounted volume from Default pool and we have one 
storage node with 2 adv_file devices with mounted volumes from Default pool.

Lately I noticed Networker is dragging its feet and backup continues into 
working hours so I investigated a bit and concluded that Networker is not using 
all (adv_file) devices/volumes from Default pool. For example, if it starts 
backup from some group it picks volume/device from Default pool. In the 
meantime, another group starts which requests volume/device from Default pool. 
In Default pool we have three volumes/devices available, but instead picking 
one of them Networker repeatedly generates infos/alerts:

backup-sun nsrd media info&#58; Suggest manually labeling a new writable volume 
for pool 'Default' 
backup-sun nsrd media request critical&#58; Waiting for 1 writable volumes to 
backup pool 'Default' disk or tape on backup-sun 
backup-sun nsrd media critical event&#58; Waiting for 1 writable volumes to 
backup pool 'Default' disk&#40;s&#41; or tape&#40;s&#41; on backup-sun 
backup-sun nsrd media request critical&#58; Waiting for 2 writable volumes to 
backup pool 'Default' disk or tape on backup-sun 
backup-sun nsrd media event cleared&#58; Waiting for 1 writable volumes to 
backup pool 'Default' disk&#40;s&#41; or tape&#40;s&#41; on backup-sun 
backup-sun nsrd media critical event&#58; Waiting for 2 writable volumes to 
backup pool 'Default' disk&#40;s&#41; or tape&#40;s&#41; on backup-sun
 
I think Networker should, after reaching target session for one device in the 
pool, pick next available device in the pool and so on. But it doesn't.

Is there a way to check and correct this?

+----------------------------------------------------------------------
|This was sent by smirkovic AT lts DOT rs via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER


Disclaimer:
http://www.afm.nl/disclaimer
http://www.afm.nl/disclaimer_english/
Indien u de link niet kunt openen, neemt u dan contact op met 
telefoonnummer +31 (0)20 7972000. Meer informatie vindt u op de 
website http://www.afm.nl.
If you are unable to access the link, please dial +31 (0)20 
7972000 
Additional information is available on the website 
http://www.afm.nl.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>