Hello,
I'm testing our new library (Quantum Scalar i500 with 2 HP LTO4 drives
FC) in our new server (Windows Server 2008 x64).
After installing Windows + Updates to SP2, I've installed latest driver
of i500, HP tapes and Qlogic QLE2460 HBA.
Then, I've installed the same version of Legato we have in our actual
server (the server we want to replace with the new one).
I've loaded and imported 20 LTO4 tapes in the library (all of the are
new, not used yet). I've done an inventory. All of them have a barcode
label and none a volume label. It's OK. When doing this inventory I've
got a lot of device/media errors. Suspect.
Then, I've tried to label the tapes and assign them to the Default pool
WITHOUT SUCCESS. I get a lot of device/media errors and the tapes are
set in 'service' mode after the 21 error (I'm attaching a log window
snapshot).
http://img8.imageshack.us/img8/1475/20091126154630.jpg
Any idea about what to check for to see if is a hardware problem (the
library is new but it can be defective), tape problem (I've tested more
than 20 tapes all with the same problem) or software (Legato + Windows +
Drivers).
Thank you very much!
--
Manel Rodero Blánquez
o o o IT Systems Manager
o o o Laboratori de Càlcul
o o o Facultat d'Informàtica de Barcelona
U P C Universitat Politècnica de Catalunya - Barcelona Tech
E-mail : manel AT fib.upc DOT edu
Tel. : +34 93 401 0847
Web : http://www.fib.upc.edu/
======================================================================
Abans d'imprimir aquest missatge, si us plau, assegureu-vos que sigui
necessari. El medi ambient és cosa de tots.
--[ http://www.fib.upc.edu/disclaimer/ ]------------------------------
ADVERTIMENT / TEXT LEGAL: Aquest missatge pot contenir informació
confidencial o legalment protegida i està exclusivament adreçat a la
persona o entitat destinatària. Si vosté no es el destinatari final o
persona encarregada de recollir-lo, no està autoritzat a llegir-lo,
retenir-lo, modificar-lo, distribuir-lo, copiar-lo ni a revelar el seu
contingut. Si ha rebut aquest correu electrònic per error, li preguem
que informi al remitent i elimini del seu sistema el missatge i el
material annex que pugui contenir. Gràcies per la seva col·laboració.
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|