[Networker] Tape Usage Skyrockets!
2009-05-29 12:53:01
The past 2 days I am filling up all of my tapes when in the past I barely use
1. I am trying to figure out if I have a hardware issue or a networker issue at
this point. I looked at the save sets stored on the tape and don't really see
that it is enough to fill up a tape.
My device seems to be set to the proper tape type. So, what can I test or check
on the Networker side to verify that the amount of data I am backing up is the
same was what on the tape, if that makes sense?
Networker 7.5
HP DL380
HP Autoloader 1/8 Ultrium 3
+----------------------------------------------------------------------
|This was sent by troy.kutil AT milwaukeetool DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Tape Usage Skyrockets!,
tkutil <=
|
|
|