Hi Allan,
according to the manpage of the scanner command you can also perform a
restore without using the recover command.
Please open the manpage of the scanner (8) command and scroll down to the
maintenance section. There you can find
the following samples:
Extracting a save set for /usr and relocating to /mnt:
scanner -S 637475597 /dev/nrst8 | uasm -rv -m /usr=/mnt
or
scanner -S 637475597 /dev/nrst8 -x uasm -rv -m /usr=/mnt
Extracting all save sets from client mars and relocating to /a:
scanner -c mars /dev/nrst8 -x uasm -rv -m/=/a
Maybe that helps, because yo do not need any new pools within your
Networker installation.
Kind Regards,
Stefan
Allan Nelson <an AT CEH.AC DOT UK>
Gesendet von: EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
13.03.2009 16:38
Bitte antworten an
EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>; Bitte
antworten
an
Allan Nelson <an AT CEH.AC DOT UK>
An
NETWORKER AT LISTSERV.TEMPLE DOT EDU
Kopie
Thema
[Networker] Media pool question - the perils of case!
Hi
(Networker 7.4.4 on Solaris 10)
I'm scanning some tapes in from a remote site to do a small restore of
some data.
The tapes in question were in a pool called 'monthend' at the remote
site.
Scanner reports when it first starts reading the tape that the pool
monthend should be created manually after the scan has finished (ie it
doesn't exist here).
We have a pool here called (unfortunately) 'Monthend' (ie a capital M
is the only difference).
The problem I'm having is that I can scan in the tapes, I can then
browse the index and mark files for restore (I'm doing a directed
recover),
but when I look at the 'Required Volumes' for the restore, it shows as
'Unknown'.
So, I thought I'd create a pool 'monthend' in NMC.
In my list of pools I see 'Monthend' but no 'monthend'
I select New, call the pool monthend, click OK, and it tells me I
already have a pool called that!
Anybody got any ideas how I can get out of this dilemma? Can tapes be
moved to new pools somehow?
Any ideas much appreciated.
Cheeers... Allan.
------------------- TEXT.htm follows -------------------
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html;
charset=3Diso-8859-1"=
>
<META content=3D"MSHTML 6.00.6000.16809" name=3DGENERATOR></HEAD>
<BODY style=3D"MARGIN: 4px 4px 1px; FONT: 10pt Tahoma">
<DIV style=3D"COLOR: #000000">Hi</DIV>
<DIV style=3D"COLOR: #000000">(Networker 7.4.4 on Solaris 10)</DIV>
<DIV style=3D"COLOR: #000000">I'm scanning some tapes in from a remote =
site to do a small restore of some data.</DIV>
<DIV style=3D"COLOR: #000000">The tapes in question were in a pool called
=
'monthend' at the remote site.</DIV>
<DIV style=3D"COLOR: #000000"> </DIV>
<DIV style=3D"COLOR: #000000">Scanner reports when it first starts reading
=
the tape that the pool monthend should be created manually after the scan
=
has finished (ie it doesn't exist here).</DIV>
<DIV style=3D"COLOR: #000000">We have a pool here called (unfortunately) =
'Monthend' (ie a capital M is the only difference).</DIV>
<DIV style=3D"COLOR: #000000"> </DIV>
<DIV style=3D"COLOR: #000000">The problem I'm having is that I can scan in
=
the tapes, I can then browse the index and mark files for restore (I'm =
doing a directed recover),</DIV>
<DIV style=3D"COLOR: #000000">but when I look at the 'Required Volumes' =
for the restore, it shows as 'Unknown'.</DIV>
<DIV style=3D"COLOR: #000000"> </DIV>
<DIV style=3D"COLOR: #000000">So, I thought I'd create a pool 'monthend' =
in NMC.</DIV>
<DIV style=3D"COLOR: #000000">In my list of pools I see 'Monthend' but no
=
'monthend'</DIV>
<DIV style=3D"COLOR: #000000">I select New, call the pool monthend, click
=
OK, and it tells me I already have a pool called that!</DIV>
<DIV style=3D"COLOR: #000000"> </DIV>
<DIV style=3D"COLOR: #000000">Anybody got any ideas how I can get out of =
this dilemma? Can tapes be moved to new pools somehow?</DIV>
<DIV style=3D"COLOR: #000000"> </DIV>
<DIV style=3D"COLOR: #000000">Any ideas much appreciated.</DIV>
<DIV style=3D"COLOR: #000000"> </DIV>
<DIV style=3D"COLOR: #000000">Cheeers... Allan.</DIV>
<DIV style=3D"COLOR: #000000"> </DIV>
<DIV style=3D"COLOR: #000000"> </DIV>
<DIV style=3D"COLOR: #000000"> </DIV></BODY></HTML>
--
This message (and any attachments) is for the recipient only. NERC
is subject to the Freedom of Information Act 2000 and the contents
of this email and any reply you make may be disclosed by NERC unless
it is exempt from release under the Act. Any material supplied to
NERC may be stored in an electronic records management system.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
--------------------------------------------------------------------------
debitel AG
Gropiusplatz 10
70545 Stuttgart
Sitz und Registergericht Stuttgart, HRB Nr. 19 835
Vorsitz Aufsichtsrat: Prof. Dr. Helmut Thoma
Vorstand: Joachim Preisig (Sprecher),
Lars Dittrich, Stephan Esch
http://www.debitel.de
--------------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
