As root on the linux box, control station, you could restore
to /nas/quotafs/slot_2/<filesystem> and put it directly on the NS20 filer if
the filesystem is on data mover 2. Change the 2 to match the data mover.
That is a automounted direct
On Thursday 10 April 2008, Warden, Kim wrote:
> Hello Randy,
>
> Thanks for your reply. Makes sense to me.
>
> Call me stupid (go ahead, I'm doing it right now), but I can't figure
> out what needs to be done to accomplish. I've read the book, I've
> searched web. When I try to start rfs using the info in the book I have
> I get a "command not found", so no rfs is probably the problem...yes?
>
> Here's what I'm doing and the generated message:
> # mount -F rfs ns20 /ns20_mount
> mount: operation not applicable to FSType rfs
>
> Tried this too, just in case (it's in a book...):
> # mount -F -rfs ns20 /ns20_mount
> mount: operation not applicable to FSType -rfs
>
> -----Original Message-----
> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> On
> Behalf Of Randy Doering
> Sent: Thursday, April 10, 2008 1:17 PM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] Recover to different box
>
> ----- Original Message ----
> From: "Warden, Kim" <kwarden AT MPR DOT COM>
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Sent: Thursday, April 10, 2008 12:45:37 PM
> Subject: [Networker] Recover to different box
>
> Hi all,
>
> Have a dead SUN box. Need to relocate restore of that box's latest
> backup to a Celerra NS20 NAS. I've heard it's possible...?
>
> Question:
> What would be the relocation path that should be specified in Networker
> Legato for restoring from the backup tape of one box to the disk of
> another box? Legato continues to attempt to restore the data to the
> original drive location (albeit a different folder as specified in the
> "relocate" field).
>
> Environment:
> Networker 7.2.2 jumbo
> Backup tape of SUN Sparc running Solaris 8
> Want to restore to Celerra NS20 NAS running Linux OS
> - this NS20 is also a Networker backup client
>
> Many advanced thanks to all for any insight/help!
>
> ~ Kim
>
> I would create a file system on the Celerra, NFS mount it on your
> Networker server and specify that mount point as the restore location.
>
> Randy
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this
> list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type
> "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this
> list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or via RSS at
> http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|