Hi Bob

Thanks for the reply.  My problem was in specifying a 'recover storage
node', which was not what I wanted to test in this case.

Thanks!
tl 

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Wood, R A (Bob)
Sent: Monday, March 10, 2008 12:20 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Recover backup from UNC-mounted AFTD

It is a bit strange. First thoughts were something like pool/device
selection but you've made a successful backup so that should rule that
out.

What do you get if you try mminfo on that vol?
What do you get if you try scanner on the AFTD?  

If you examine the device properties does that shed any light?

Bob

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Terry Lemons
Sent: 08 March 2008 23:43
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Recover backup from UNC-mounted AFTD

 
Hi

I've followed the "NetWorker Administration Guide" instructions to set
up a UNC-mounted network file share as an AFTD device on my NetWorker
for Windows V7.4 SP1 Windows 2003 system.  I've labeled, mounted, and
done a backup to this AFTD device.  But, when I try to do a recover, I
get:

"no matching devices on 'server' for recover by client 'tivo1'"
"enabled or check device; volume tivo1.001.RO is needed"

Volume tivo1.001.RO is definitely mounted.  I've unmounted/mounted both
the RO and regular AFTD volume, even rebooted the Windows system, but I
keep getting this error.

Thoughts?

Thanks!
tl

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER