Thank Faidherbe so much,
I configured DDS already. The problem was solved, does not need to
upgrade software.
Faidherbe, Thierry wrote:
> To setup DDS : easiest way is to recreate your jukebox and answer
> yes when it ask if device is shared with different hosts. It is
> faster and you cannot be wrong. Just ran inquire on each SN, and
> do the matching between PHYSICAL device seen and corresponding driver
> (\\.\tapex for windows, /dev/rmt/... for unix). It will be simpler
> to give right values.
>
> If not, edit each existing devices and define an Hardware Device Id,
> unique for each PHYSICAL device.
>
> Then, create the new devices and fill SAME Hardware ID for corresponding
> PHYSICAL DEV.
>
> Sample : rd=hostA:\\tape1 -> HardwareID HWID1
> rd=hostB:\\tape2 -> HardwareID HWID2
> new : rd=hostC:\\tape1 -> HardwareID HWID1 (DDS Share of Physical dev
> 1)
> new : rd=hostD:\\tape3 -> HardwareID HWID2 (DDS Share of Physical dev
> 2)
>
> Edit then the jukebox. Edit Number of device (add 2 in this case)
> Let number of DRIVE as it is (is the number of physical dev in library)
>
> Edit then Device list and add as follow : take care !
> from : rd=hostA:\\tape1 ( HardwareID HWID1 )
> rd=hostB:\\tape2 ( HardwareID HWID2 )
>
> to : rd=hostA:\\tape1 ( HardwareID HWID1 )
> rd=hostC:\\tape1 ( HardwareID HWID1 )
> rd=hostB:\\tape2 ( HardwareID HWID2 )
> rd=hostD:\\tape3 ( HardwareID HWID2 )
>
> Should be ok.
>
> Do not forget setting block size if same medium is shared accorss
> Windows and
> Unix systems.
>
> HTH
>
> TH
> Kind regards - Bien cordialement - Vriendelijke groeten,
>
> Thierry FAIDHERBE
>
> HP Services - Storage Division
> Tru64 Unix and Legato Enterprise Backup Solutions Consultant
>
> ********* ********* HEWLETT - PACKARD
> ******* h ******* 1 Rue de l'aeronef/Luchtschipstraat
> ****** h ****** 1140 Bruxelles/Brussel/Brussels
> ***** hhhh pppp *****
> ***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
> ***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
> ****** p ****** BELGIUM
> ******* p *******
> ********* ********* Phone : +32 (0)2 / 729.85.42
> Mobile : +32 (0)498/ 94.60.85
> Fax : +32 (0)2 / 729.88.30
> I N V E N T Email/MSN : thierry.faidherbe(at)hp.com
> Internet : http://www.hp.com/
> Enterprise number 0402.220.594 - RPM/RPR Brussels
>
> -----Original Message-----
> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> On
> Behalf Of huenian
> Sent: jeudi 31 mai 2007 10:08
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] Cannot unmount tape automatically after
> finishing backup
>
> Thanks Davina and Faidherbe for your reply
>
> The issue is : "auto unmount" worked with my old system
> but with my new backup system , it doesnot work
>
> My old backup system: networker server 7.2.1 on win2k3, tape library IBM
> 3582
>
> I have just replaced them with: tape library IBM ts3200 3573
> However, i dont think that tape library is the problem.
>
> Another question: How to configure the Dynamic Drive Sharing
> environment?
>
> I had two license Dynamic Drive Sharing on networker server for two
> drives.
>
> Is there any option for this problem else except "unmount schedule
> task"??
>
> Have a nice day
> Regards
> Tan
>
>
>
>
>
>
>
>
>
> Faidherbe, Thierry wrote:
>
> > Davina is correct.
> >
> > Another way is, if you are not sharing your library,
> > to schedule at regular time (taskmgr for windows or crontab for Unix)
> > a "nsrjb -u" without specifying any drives.
> >
> > Any mounted and idle device will me unmounted.
> >
> > HTH
> >
> > TH
> >
> >
> >
> >
> > Kind regards - Bien cordialement - Vriendelijke groeten,
> >
> > Thierry FAIDHERBE
> >
> > HP Services - Storage Division
> > Tru64 Unix and Legato Enterprise Backup Solutions Consultant
> >
> > ********* ********* HEWLETT - PACKARD
> > ******* h ******* 1 Rue de l'aeronef/Luchtschipstraat
> > ****** h ****** 1140 Bruxelles/Brussel/Brussels
> > ***** hhhh pppp *****
> > ***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
> > ***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
> > ****** p ****** BELGIUM
> > ******* p *******
> > ********* ********* Phone : +32 (0)2 / 729.85.42
> > Mobile : +32 (0)498/ 94.60.85
> > Fax : +32 (0)2 / 729.88.30
> > I N V E N T Email/MSN : thierry.faidherbe(at)hp.com
> > Internet : http://www.hp.com/
> > Enterprise number 0402.220.594 - RPM/RPR Brussels
> >
> > -----Original Message-----
> > From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> >
> On
>
> > Behalf Of Davina Treiber
> > Sent: jeudi 31 mai 2007 9:11
> > To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> > Subject: Re: [Networker] Cannot unmount tape automatically after
> > finishing backup
> >
> > Preston de Guise wrote:
> >
> >
> > > Hi,
> > >
> > >
> > >
> > > > I want to ask about this issue
> > > > My networker server is networker server 7.2.1 on win 2k3
> > > >
> > >
> >
> environment
>
> >
> > >
> > > > Although i set the "idle device time" is 5min already
> > > >
> > > >
> > >
> > > Idle device timeout for versions of NetWorker 7.2.x and under only
> > >
> > >
> > worked in
> >
> >
> > > a dynamic drive sharing environment.
> > >
> > >
> >
> > Not quite. DDS is not necessary, just a shared jukebox.
> >
> > To sign off this list, send email to listserv AT listserv.temple DOT edu and
> > type "signoff networker" in the body of the email. Please write to
> > networker-request AT listserv.temple DOT edu if you have any problems with
> >
> this
>
> > list. You can access the archives at
> > http://listserv.temple.edu/archives/networker.html or
> > via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> >
> > To sign off this list, send email to listserv AT listserv.temple DOT edu and
> >
> type "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this
> list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
>
> > via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> >
>
>
> +----------------------------------------------------------------------
> |This was sent by tan.pham AT gmail DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this
> list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
+----------------------------------------------------------------------
|This was sent by tan.pham AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
