I'm getting the following error when trying to run any groups (manual or
auto enabled) on our server:
savegrp: error, cannot open new progress file
I also tried adding just a single client (fred) to a group (testfull)
(pool=testfull) and then running that group as:
# savegrp -v -l full testfull
fred:All level=full
11/23/06 17:36:36 savegrp: Run up to 20 clients in parallel
11/23/06 17:36:36 savegrp: error, cannot open new progress file
11/23/06 17:36:36 savegrp: Failed to update server, aborting Savegroup.
11/23/06 17:36:36 savegrp: group testfull aborted.
11/23/06 17:36:36 savegrp: no save sets to check if written to verified
media
11/23/06 17:36:36 savegrp: error, cannot open new progress file
11/23/06 17:36:36 savegrp: Failed to update server, aborting Savegroup.
Here are the messages from /nsr/logs/messages:
Nov 23 17:52:01 server root: [ID 702911 daemon.notice] NetWorker
savegroup: (info) starting testfull (with 1 client(s))
Nov 23 17:52:01 server root: [ID 702911 daemon.notice] NetWorker
savegroup: (alert) testfull aborted, total 1 client(s), 0 Hostname
(s) Unresolved, 0 Failed, 1 Succeeded.
Nov 23 17:52:01 server root: [ID 702911 daemon.notice] Start time: Thu
Nov 23 17:52:01 2006
Nov 23 17:52:01 server root: [ID 702911 daemon.notice] End time: Thu
Nov 23 17:52:01 2006
Nov 23 17:52:01 server root: [ID 702911 daemon.notice]
Nov 23 17:52:01 server root: [ID 702911 daemon.notice] --- Never Started
Save Sets ---
Nov 23 17:52:01 server root: [ID 702911 daemon.notice]
Nov 23 17:52:01 server root: [ID 702911 daemon.notice] savegrp: fred:All
save was never started
Nov 23 17:52:01 server root: [ID 702911 daemon.notice] savegrp:
fred:index index was never started
Nov 23 17:52:01 server root: [ID 702911 daemon.notice]
Here are the messages from /nsr/logs/deamon.log:
11/23/06 17:52:01 savegrp: error, cannot open new progress file
11/23/06 17:52:01 savegrp: Failed to update server, aborting Savegroup.
11/23/06 17:52:01 nsrd: savegroup info: starting testfull (with 1
client(s))
11/23/06 17:52:01 savegrp: group testfull aborted.
11/23/06 17:52:01 savegrp: error, cannot open new progress file
11/23/06 17:52:01 savegrp: Failed to update server, aborting Savegroup.
11/23/06 17:52:01 nsrd: savegroup alert: testfull aborted, total 1
client(s), 0 Hostname(s) Unresolved, 0 Failed, 1 Succeeded.
11/23/06 17:52:01 nsrd: runq: NSR group testfull exited with return code 1.
However, I am able to back up data to this group from the client as:
save -b testfull -l full /path
We're running 7.2.2 on Solaris 2.9 with a Linux storage node (also runs
7.2.2). All clients are at 7.2.2. The current media database and indexes
were transferred
over from our old 6.1.1 server (was running Solaris 2.8). The server
name is the same. I ran nsrim -X on the old server
before the transfer and on the new server after. The old server is shut
down to avoid any ip conflicts while the new server
is up. We've been doing recent backups on the old server, so the new
server was still considered a "test" server. If I wanted to
test it, I would shut down the old server and then bring up the new one.
I know I'd done backups a while ago without seeing these problems. I went to
put the new server into production today, and then this happens! Sheesh!
I should note that I'm able to load, unload,
mount, label and inventory tapes. Recovering data that was written to
tapes labeled on the old server also works. I am
also able to clone data from old tapes and read that data to.
Any ideas?
I'm having a lousy thanksgiving [sigh ...]. Thanks much.
George
--
George Sinclair - NOAA/NESDIS/National Oceanographic Data Center
SSMC3 4th Floor Rm 4145 | Voice: (301) 713-3284 x210
1315 East West Highway | Fax: (301) 713-3301
Silver Spring, MD 20910-3282 | Web Site: http://www.nodc.noaa.gov/
- Any opinions expressed in this message are NOT those of the US Govt. -
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
