Hi everybody!

As many of you have noticed... I think the bad guy here... is actually the 
installation guide from Legato. After installing sp4 on my NetWare 6.5, 
Everything started to work... and very well I must say!

I have tried both NetWorker 7.1.3 and 7.2.1, both on a Windows 2000 backup 
server.

So for everybody out there having problems... if you can, I would put my money 
on sp4 for NetWare 6.5. If you are running another version of NetWare... then 
I really don't know, haven't tried that yet.

Another thing I recommend. Is to install the NetWorker for Netware from a 
Windows box. I saw that some files in the installation directory(SYS:/NSR) 
where a bit different when installing from the console!?

Thanks to you all!
/Joaquin Camp


On Tuesday 13 September 2005 02.33, Dave Gold - News wrote:
> Hi Joaquin,
>
> Try putting both the client and server in the NetWare hosts file
> (sys:/etc/hosts), wait 15 minutes, then try a manual save in a verbose
> mode. eg save -s <nsr_server> -v -U admin -P password sys:/etc/
>
> my example:
> save.nlm -s dgtest -v -U admin -P passtst sys:/etc/
>
> That is probably the best place to start. Once you get the client side save
> working, you can try the GUI, then a scheduled save.
>
> Dave
>
> Date:    Fri, 9 Sep 2005 14:13:51 +0200
> From:    Joaquin Camp <joaquin.camp AT PROACT DOT SE>
> Subject: NetWorker for NetWare 7.2... anybody!?
>
>   Hi there,
>
> Has anybody tested the new NetWorker client for NetWare yet?
> I have been playing around with it, but no luck! I can't make it to backup
> anything!?
>
> I'm using a newly installed NetWare 6.5 sp3 with the patches recommended by
> EMC/Legato, as stated in the Installation Guide.
> The server is a Windows 2000 running NetWorker 7.2.1.
>
> No matter what saveset (incl. All) I try to backup. I always get:
>
> helge:DATA: Invalid save set or save set not available DATA:
>
> And it doesn't matter if I put a / or \ afterwards. The same goes when i
> try to backup a folder in DATA:. When I put saveset All, it juststated the
> same for every saveset.
> The things that bugs me most, is the fact that I can't even get in and run
> a manual backup through the "sexy" GUI. I have read that some of you have
> managed that.
> Damn!... I even tried the CLI whit the same results...
>
> Anybody out there who's up for a challenge!?
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and 
> type
> "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems wit this
> list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or via RSS at
> http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

-- 
Joaquin Camp
PROACT Legato Core Team

PROACT IT Sweden AB
Isafjordsgatan 35-37
P.O.Box 1205
SE-164 28 KISTA
Sweden

Tel: +46 (0)8 410 666 00
Direct: +46 (0)8 410 667 14
Cell/SMS: +46 (0)73 35 667 14

E-mail: joaquin.camp AT proact DOT se
Web: www.proact.se

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER