Re: [Networker] networker for netware 7.2
2005-09-12 20:39:10
Hi Joaquin,
Try putting both the client and server in the NetWare hosts file
(sys:/etc/hosts), wait 15 minutes, then try a manual save in a verbose mode.
eg save -s <nsr_server> -v -U admin -P password sys:/etc/
my example:
save.nlm -s dgtest -v -U admin -P passtst sys:/etc/
That is probably the best place to start. Once you get the client side save
working, you can try the GUI, then a scheduled save.
Dave
Date: Fri, 9 Sep 2005 14:13:51 +0200
From: Joaquin Camp <joaquin.camp AT PROACT DOT SE>
Subject: NetWorker for NetWare 7.2... anybody!?
Hi there,
Has anybody tested the new NetWorker client for NetWare yet?
I have been playing around with it, but no luck! I can't make it to backup
anything!?
I'm using a newly installed NetWare 6.5 sp3 with the patches recommended by
EMC/Legato, as stated in the Installation Guide.
The server is a Windows 2000 running NetWorker 7.2.1.
No matter what saveset (incl. All) I try to backup. I always get:
helge:DATA: Invalid save set or save set not available DATA:
And it doesn't matter if I put a / or \ afterwards. The same goes when i try
to backup a folder in DATA:. When I put saveset All, it juststated the same
for every saveset.
The things that bugs me most, is the fact that I can't even get in and run a
manual backup through the "sexy" GUI. I have read that some of you have
managed that.
Damn!... I even tried the CLI whit the same results...
Anybody out there who's up for a challenge!?
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Networker] networker for netware 7.2,
Dave Gold - News <=
|
|
|