Hi Terry,
I'm not sure exactly what you mean. We have the storage node hooked up
to a Qualstar 8466 via a dual channel SCSI Adaptec 39320, the network adapter
is a Fiber Gbit card.
Thanks,
Brian
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Terry Lemons
Sent: Tuesday, July 13, 2004 12:50 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Tape drives hangin
Hi Brian
It's hard to make any guesses without more information. But, if you are using
Fibre Channel HBAs to access your disk or tape resources, are you using
STORport or SCSIport drivers?
Thanks
tl
Terry Lemons
CLARiiON Applications Integration Engineering
EMC²
where information lives
4400 Computer Drive, MS D239
Westboro MA 01580
Phone: 508 898 7312
Email: Lemons_Terry AT emc DOT com
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Spindler, Brian
Sent: Tuesday, July 13, 2004 12:40 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Tape drives hangin
We have NetWorker 7.1.2 on Windoze 2003 server and a separate storage node same
config. I think every single night we have the same issue, most of our backups
will complete but several of them will not be finished and the tape drives will
simply be idle and it takes an enormous amount of effort to correct (i.e.
reboot, element status inventories etc...). Has anyone had this trouble? Know
how to fix it?
Thanks,
Brian
--
Note: To sign off this list, send a "signoff networker" command via email to
listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also view and
post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email to
listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also view and
post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|