Kern, et al....

I tried another backup.  Here is my cliconfig.  I parred it down to just the restore stuff.

#********************************************************************************

# bluewhale

#********************************************************************************

   Client {

      Name                   = bluewhale

      Address                = bluewhale.backup.bnesystems.com

      Catalog                = BS01-Catalog

      Password               = "xxxxxx"

      FileRetention          = 15 days

      JobRetention           = 15 days

      AutoPrune              = yes

      MaximumConcurrentJobs  = 1

   }

   Job {

      Name                   = Restore_mail_bluewhale

      FileSet                = Full_mail_bluewhale

      Type                   = Restore

      Pool                   = Pool_mail_bluewhale

      Client                 = bluewhale

      Messages               = Standard

   }

   Pool {

      Name                   = Pool_mail_bluewhale

      PoolType               = Backup

      Storage                = Storage_bluewhale

      MaximumVolumeJobs      = 1

      CatalogFiles           = yes

      AutoPrune              = yes

      VolumeRetention        = 1 week

      Recycle                = yes

      LabelFormat            = "mail-"

   }

   Storage {

      Name                   = Storage_bluewhale

      Address                = 10.10.10.199

      SDPort                 = 9103

      Password               = "imadirector"

      Device                 = File_bluewhale

      MediaType              = NAS_bluewhale

      MaximumConcurrentJobs  = 1

   }

   Schedule {

      Name                   = Schedule_mail_bluewhale

      Run                    = Level=Full sun-sat at 01:00

   }

   FileSet {

      Name = Full_mail_bluewhale

      Include {

         Options {

            signature=SHA1

         }

         File="mail.tar"

      }

   }

During the restore I ran status storage from the console.  I get this

*status sto

The defined Storage resources are:

     1: Storage_asterisk

     2: Storage_besc-4dvapp

     3: Storage_besc-bs01

     4: Storage_besc-unixmgr01

     5: Storage_bluewhale

     6: Storage_demo

     7: Storage_dev

     8: Storage_mako

Select Storage resource (1-8): 5

Connecting to Storage daemon Storage_bluewhale at 10.10.10.199:9103

BS01-SD1 Version: 5.2.2 (26 November 2011) x86_64-unknown-linux-gnu ubuntu 11.10

Daemon started 09-Sep-14 09:19. Jobs: run=1, running=0.

 Heap: heap=598,016 smbytes=386,922 max_bytes=405,712 bufs=947 max_bufs=949

 Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 mode=0,0

Running Jobs:

Reading: Full Restore job Restore_mail_bluewhale JobId=12922 Volume="mail-0386"

    pool="Pool_mail_bluewhale" device="File_bluewhale" (/nas/bacula/bluewhale)

    Files=0 Bytes=0 Bytes/sec=0

    FDReadSeqNo=6 in_msg=6 out_msg=2320699 fd=6

====

Jobs waiting to reserve a drive:

====

Terminated Jobs:

 JobId  Level    Files      Bytes   Status   Finished        Name

===================================================================

 12913  Incr        108    73.85 M  OK       08-Sep-14 20:02 Backup_os_dev

 12912  Full          4    61.80 G  OK       08-Sep-14 20:24 Backup_app_demo

 12914  Incr        230    57.85 M  OK       09-Sep-14 00:00 Backup_os_asterisk

 12916  Incr         31    68.06 M  OK       09-Sep-14 00:01 Backup_os_besc-unixmgr01

 12917  Incr          0         0   Cancel   09-Sep-14 00:03 Backup_os_bluewhale

 12918  Full          4    501.3 M  OK       09-Sep-14 00:04 Backup_app_dev

 12915  Incr        256    1.099 G  OK       09-Sep-14 00:06 Backup_os_besc-bs01

 12919  Full          4    54.41 G  OK       09-Sep-14 01:04 Backup_app_mako

 12920                0         0   Cancel   09-Sep-14 09:17 Restore_mail_bluewhale

 12921                0         0   OK       09-Sep-14 09:43 Restore_mail_bluewhale

====

Device status:

Device "File_asterisk" (/nas/bacula/asterisk) is not open.

Device "File_besc-4dvapp" (/nas/bacula/besc-4dvapp) is not open.

Device "File_besc-bs01" (/nas/bacula/besc-bs01) is not open.

Device "File_besc-unixmgr01" (/nas/bacula/besc-unixmgr01) is not open.

Device "File_bluewhale" (/nas/bacula/bluewhale) is mounted with:

    Volume:      mail-0386

    Pool:        *unknown*

    Media type:  NAS_bluewhale

    Total Bytes Read=17,923,756,032 Blocks Read=277,836 Bytes/block=64,512

    Positioned at File=4 Block=743,886,199

Device "File_demo" (/nas/bacula/demo) is not open.

Device "File_dev" (/nas/bacula/dev) is not open.

Device "File_mako" (/nas/bacula/mako) is not open.

Device "File_qa" (/nas/bacula/qa) is not open.

Device "File_qa2" (/nas/bacula/qa2) is not open.

Device "File_smart" (/nas/bacula/smart) is not open.

====

Used Volume status:

mail-0386 on device "File_bluewhale" (/nas/bacula/bluewhale)

    Reader=1 writers=0 devres=0 volinuse=1

mail-0386 read volume JobId=12922

====

====

Why is Pool "*unknown*??  Device status show Total Bytes Read increasing each time I complete a status stirage check, BUT under the "Reading" section it shows "Bytes=0" and Bytes/sec=0"

Finally the "job" completes after approx 25 minutes and the log captures this

09-Sep 10:11 BS01-DIR1 JobId 12922: Start Restore Job Restore_mail_bluewhale.2014-09-09_10.11.16_04

09-Sep 10:11 BS01-DIR1 JobId 12922: Using Device "File_bluewhale"

09-Sep 10:11 BS01-SD1 JobId 12922: Ready to read from volume "mail-0386" on device "File_bluewhale" (/nas/bacula/bluewhale).

09-Sep 10:11 BS01-SD1 JobId 12922: Forward spacing Volume "mail-0386" to file:block 0:219.

09-Sep 10:33 BS01-SD1 JobId 12922: End of Volume at file 28 on device "File_bluewhale" (/nas/bacula/bluewhale), Volume "mail-0386"

09-Sep 10:33 BS01-SD1 JobId 12922: End of all volumes.

09-Sep 10:12 BS01-FD1 JobId 12922: Error: create_file.c:292 Could not open /tmp/data/backups/mail/fifo/mail.tar: ERR=Interrupted system call

09-Sep 10:33 BS01-DIR1 JobId 12922: Bacula BS01-DIR1 5.2.2 (26Nov11):

  Build OS:               x86_64-unknown-linux-gnu ubuntu 11.10

  JobId:                  12922

  Job:                    Restore_mail_bluewhale.2014-09-09_10.11.16_04

  Restore Client:         besc-bs01

  Start time:             09-Sep-2014 10:11:18

  End time:               09-Sep-2014 10:33:31

  Files Expected:         1

  Files Restored:         0

  Bytes Restored:         0

  Rate:                   0.0 KB/s

  FD Errors:              0

  FD termination status:  OK

  SD termination status:  OK

  Termination:            Restore OK -- warning file count mismatch

09-Sep 10:33 BS01-DIR1 JobId 12922: Begin pruning Jobs older than 15 days .

09-Sep 10:33 BS01-DIR1 JobId 12922: No Jobs found to prune.

09-Sep 10:33 BS01-DIR1 JobId 12922: Begin pruning Files.

09-Sep 10:33 BS01-DIR1 JobId 12922: No Files found to prune.

09-Sep 10:33 BS01-DIR1 JobId 12922: End auto prune.

Thoughts??

Thanks ----Kenny

On Tue, Sep 9, 2014 at 9:56 AM, Kern Sibbald <kern AT sibbald DOT com> wrote:

Hello,

I would remove the

   readfifo=yes
 
though I am not 100% sure it is used on a restore.

Then simply restore the file "mail.tar" making absolutely sure you have not marked any directories for restore.  Do the restore to /tmp. Then you will have the mail.tar file that you can detar manually to get your files back.

Best regards,
Kern

On 09/09/2014 03:25 PM, Kenny Noe wrote:

Ana,  Hi!  Thanks for the reply...   I get the same error no matter where I try and write to.  I've tried to a remote NAS and to local /tmp.

Kern,  below is my Fileset.  Should I remove the "Include" statment?

 FileSet {

      Name = Full_mail_bluewhale

      Include {

         Options {

            signature=SHA1

            readfifo=yes

         }

         File="/data/backups/mail/fifo/mail.tar"

      }

   }

Thank you all for your comments so far.  I'm still trying to complete the restore, so any input would be appreciated.

Sincerely,

--Kenny

...