> On 25/04/12 19:59, Adrian Reyer wrote:
>>> But the time it takes for status/load/unload is about 2 minutes per
>>> action
>>> where 1 minute and 45 seconds goes by doing "nothing at all".
>>
>> 2 Minutes sound reasonable, you can see stuff moving through the front
>> window. What do you mean by 'nothing at all': just from the software
>> point of view, or if you look inside the hardware (if that is possible
>> with the 8000e)?
>
> I've got a Neo8000 and it spends 10 seconds at most before moving, when
> given a load/unload command.
>
> 2 minutes sounds manifestly excessive - I'd guess that something else on
> the machine is holding the sg device open.

Thank you very much for sharing.

Can you tell me the details of your configuration. SCSI-controller,
SAS/FC, Linux-kernel-version, mtx-version, firmware of the Neo8000e?

That would be awesome to try to compare to my configuration, so I hopefully
can diff me to the problem.

-- 
Jesper Krogh


------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users