Bacula-users
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Bacula-users] job dying after it finishes

2011-10-04 12:59:17
Subject: [Bacula-users] job dying after it finishes
From: Mark Yarbrough <marky AT itechnv DOT com>
To: "bacula-users AT lists.sourceforge DOT net" <bacula-users AT lists.sourceforge DOT net>
Date: Tue, 4 Oct 2011 09:52:53 -0700

I am running bacula w/vchanger on Debian and backing up several machines successfully, however my largest file store (which takes a few days to run) is crashing after it has written the entire library to disk/tape.  I am not completely sure what to do with this error.  The error reads that there is a problem with the database table, and there was a network error.  I have looked at the switch logs and there are no indications of a network failure.  Same goes with the client or the server.  I am thinking that one of my partitions isn’t big enough or something like that.  What I find most interesting is the error reports that nothing was backed up but if I calculate the amount of space that is used by the backups and compare it to the amount of space that is supposed to back up they are the same.  Any advice is truly appreciated. 

 

--begin paste—

 

Drive sizes

Filesystem                          Size        Used     Avail      Use%    Mounted on

/dev/cciss/c0d0p1            323M    146M     161M      48%       /

tmpfs                                    32G        0              32G         0%         /lib/init/rw

udev                                      32G        200K      32G        1%          /dev

tmpfs                                    32G          0             32G        0%         /dev/shm

/dev/cciss/c0d0p9           19G        179M     18G        1%          /home

/dev/cciss/c0d1p1           270G       210M    256G       1%         /srv

/dev/cciss/c0d0p8           368M     247M     103M      71%       /tmp

/dev/cciss/c0d0p5           8.3G       707M     7.2G       9%          /usr

/dev/cciss/c0d0p6           2.8G        462M     2.2G       18%       /var

 

Error message

 

26-Sep 15:33 backup-dir JobId 105: No prior Full backup Job record found.

26-Sep 15:33 backup-dir JobId 105: No prior or suitable Full backup found in catalog. Doing FULL backup.

26-Sep 15:33 backup-dir JobId 105: Start Backup JobId 105, Job=storage.2011-09-26_15.33.28_15

26-Sep 15:33 backup-dir JobId 105: Using Device "usb-changer-drive-0"

26-Sep 15:33 backup-sd JobId 105: Volume "c1_0007_0005" previously written, moving to end of data.

26-Sep 15:33 backup-sd JobId 105: Ready to append to end of Volume "c1_0007_0005" size=66988949287 26-Sep 19:07 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

26-Sep 19:07 backup-sd JobId 105: End of medium on Volume "c1_0007_0005" Bytes=214,748,328,627 Blocks=3,328,821 at 26-Sep-2011 19:07.

26-Sep 19:07 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 25, drive 0" command.

26-Sep 19:08 backup-dir JobId 105: Using Volume "c1_0007_0006" from 'Scratch' pool.

26-Sep 19:08 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

26-Sep 19:08 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

26-Sep 19:08 backup-sd JobId 105: 3304 Issuing autochanger "load slot 26, drive 0" command.

26-Sep 19:08 backup-sd JobId 105: 3305 Autochanger "load slot 26, drive 0", status is OK.

26-Sep 19:08 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0007_0006" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 26-Sep 19:08 backup-sd JobId 105: New volume "c1_0007_0006" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 26-Sep-2011 19:08.

27-Sep 00:08 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

27-Sep 00:08 backup-sd JobId 105: End of medium on Volume "c1_0007_0006" Bytes=214,748,318,385 Blocks=3,328,812 at 27-Sep-2011 00:08.

27-Sep 00:08 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 26, drive 0" command.

27-Sep 00:09 backup-dir JobId 105: Using Volume "c1_0007_0007" from 'Scratch' pool.

27-Sep 00:09 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

27-Sep 00:09 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

27-Sep 00:09 backup-sd JobId 105: 3304 Issuing autochanger "load slot 27, drive 0" command.

27-Sep 00:09 backup-sd JobId 105: 3305 Autochanger "load slot 27, drive 0", status is OK.

27-Sep 00:09 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0007_0007" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 27-Sep 00:09 backup-sd JobId 105: New volume "c1_0007_0007" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 27-Sep-2011 00:09.

27-Sep 05:11 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

27-Sep 05:11 backup-sd JobId 105: End of medium on Volume "c1_0007_0007" Bytes=214,748,318,013 Blocks=3,328,812 at 27-Sep-2011 05:11.

27-Sep 05:11 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 27, drive 0" command.

27-Sep 05:12 backup-dir JobId 105: Using Volume "c1_0007_0008" from 'Scratch' pool.

27-Sep 05:12 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

27-Sep 05:12 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

27-Sep 05:12 backup-sd JobId 105: 3304 Issuing autochanger "load slot 28, drive 0" command.

27-Sep 05:12 backup-sd JobId 105: 3305 Autochanger "load slot 28, drive 0", status is OK.

27-Sep 05:12 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0007_0008" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 27-Sep 05:12 backup-sd JobId 105: New volume "c1_0007_0008" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 27-Sep-2011 05:12.

27-Sep 10:10 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

27-Sep 10:10 backup-sd JobId 105: End of medium on Volume "c1_0007_0008" Bytes=214,748,317,000 Blocks=3,328,812 at 27-Sep-2011 10:10.

27-Sep 10:10 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 28, drive 0" command.

27-Sep 10:11 backup-dir JobId 105: Using Volume "c1_0007_0009" from 'Scratch' pool.

27-Sep 10:11 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

27-Sep 10:11 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

27-Sep 10:11 backup-sd JobId 105: 3304 Issuing autochanger "load slot 29, drive 0" command.

27-Sep 10:11 backup-sd JobId 105: 3305 Autochanger "load slot 29, drive 0", status is OK.

27-Sep 10:11 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0007_0009" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 27-Sep 10:11 backup-sd JobId 105: New volume "c1_0007_0009" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 27-Sep-2011 10:11.

27-Sep 15:14 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

27-Sep 15:14 backup-sd JobId 105: End of medium on Volume "c1_0007_0009" Bytes=214,748,316,875 Blocks=3,328,812 at 27-Sep-2011 15:14.

27-Sep 15:14 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 29, drive 0" command.

27-Sep 15:15 backup-dir JobId 105: Using Volume "c1_0007_0010" from 'Scratch' pool.

27-Sep 15:15 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

27-Sep 15:15 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

27-Sep 15:15 backup-sd JobId 105: 3304 Issuing autochanger "load slot 30, drive 0" command.

27-Sep 15:15 backup-sd JobId 105: 3305 Autochanger "load slot 30, drive 0", status is OK.

27-Sep 15:15 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0007_0010" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 27-Sep 15:15 backup-sd JobId 105: New volume "c1_0007_0010" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 27-Sep-2011 15:15.

27-Sep 16:35 backup-sd JobId 105: End of Volume "c1_0007_0010" at 13:2064750985 on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0). Write of 64512 bytes got 58998.

27-Sep 16:35 backup-sd JobId 105: End of medium on Volume "c1_0007_0010" Bytes=57,899,325,834 Blocks=897,497 at 27-Sep-2011 16:35.

27-Sep 16:35 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 30, drive 0" command.

27-Sep 16:36 backup-dir JobId 105: Using Volume "c1_0008_0001" from 'Scratch' pool.

27-Sep 16:36 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

27-Sep 16:36 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

27-Sep 16:36 backup-sd JobId 105: 3304 Issuing autochanger "load slot 31, drive 0" command.

27-Sep 16:36 backup-sd JobId 105: 3305 Autochanger "load slot 31, drive 0", status is OK.

27-Sep 16:36 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0001" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 27-Sep 16:36 backup-sd JobId 105: New volume "c1_0008_0001" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 27-Sep-2011 16:36.

27-Sep 21:40 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

27-Sep 21:40 backup-sd JobId 105: End of medium on Volume "c1_0008_0001" Bytes=214,748,318,163 Blocks=3,328,812 at 27-Sep-2011 21:40.

27-Sep 21:40 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 31, drive 0" command.

27-Sep 21:41 backup-dir JobId 105: Using Volume "c1_0008_0002" from 'Scratch' pool.

27-Sep 21:41 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

27-Sep 21:41 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

27-Sep 21:41 backup-sd JobId 105: 3304 Issuing autochanger "load slot 32, drive 0" command.

27-Sep 21:41 backup-sd JobId 105: 3305 Autochanger "load slot 32, drive 0", status is OK.

27-Sep 21:41 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0002" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 27-Sep 21:41 backup-sd JobId 105: New volume "c1_0008_0002" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 27-Sep-2011 21:41.

28-Sep 03:16 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

28-Sep 03:16 backup-sd JobId 105: End of medium on Volume "c1_0008_0002" Bytes=214,748,316,286 Blocks=3,328,812 at 28-Sep-2011 03:16.

28-Sep 03:16 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 32, drive 0" command.

28-Sep 03:17 backup-dir JobId 105: Using Volume "c1_0008_0003" from 'Scratch' pool.

28-Sep 03:17 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

28-Sep 03:17 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

28-Sep 03:17 backup-sd JobId 105: 3304 Issuing autochanger "load slot 33, drive 0" command.

28-Sep 03:17 backup-sd JobId 105: 3305 Autochanger "load slot 33, drive 0", status is OK.

28-Sep 03:17 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0003" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 28-Sep 03:17 backup-sd JobId 105: New volume "c1_0008_0003" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 28-Sep-2011 03:17.

28-Sep 08:21 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

28-Sep 08:21 backup-sd JobId 105: End of medium on Volume "c1_0008_0003" Bytes=214,748,316,804 Blocks=3,328,812 at 28-Sep-2011 08:21.

28-Sep 08:21 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 33, drive 0" command.

28-Sep 08:22 backup-dir JobId 105: Using Volume "c1_0008_0004" from 'Scratch' pool.

28-Sep 08:22 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

28-Sep 08:22 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

28-Sep 08:22 backup-sd JobId 105: 3304 Issuing autochanger "load slot 34, drive 0" command.

28-Sep 08:22 backup-sd JobId 105: 3305 Autochanger "load slot 34, drive 0", status is OK.

28-Sep 08:22 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0004" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 28-Sep 08:22 backup-sd JobId 105: New volume "c1_0008_0004" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 28-Sep-2011 08:22.

28-Sep 13:14 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

28-Sep 13:14 backup-sd JobId 105: End of medium on Volume "c1_0008_0004" Bytes=214,748,316,932 Blocks=3,328,812 at 28-Sep-2011 13:14.

28-Sep 13:14 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 34, drive 0" command.

28-Sep 13:14 backup-dir JobId 105: Using Volume "c1_0008_0005" from 'Scratch' pool.

28-Sep 13:14 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

28-Sep 13:14 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

28-Sep 13:14 backup-sd JobId 105: 3304 Issuing autochanger "load slot 35, drive 0" command.

28-Sep 13:14 backup-sd JobId 105: 3305 Autochanger "load slot 35, drive 0", status is OK.

28-Sep 13:14 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0005" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 28-Sep 13:14 backup-sd JobId 105: New volume "c1_0008_0005" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 28-Sep-2011 13:14.

28-Sep 18:04 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

28-Sep 18:04 backup-sd JobId 105: End of medium on Volume "c1_0008_0005" Bytes=214,748,316,988 Blocks=3,328,812 at 28-Sep-2011 18:04.

28-Sep 18:04 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 35, drive 0" command.

28-Sep 18:05 backup-dir JobId 105: Using Volume "c1_0008_0006" from 'Scratch' pool.

28-Sep 18:05 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

28-Sep 18:05 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

28-Sep 18:05 backup-sd JobId 105: 3304 Issuing autochanger "load slot 36, drive 0" command.

28-Sep 18:05 backup-sd JobId 105: 3305 Autochanger "load slot 36, drive 0", status is OK.

28-Sep 18:05 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0006" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 28-Sep 18:05 backup-sd JobId 105: New volume "c1_0008_0006" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 28-Sep-2011 18:05.

28-Sep 22:53 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

28-Sep 22:53 backup-sd JobId 105: End of medium on Volume "c1_0008_0006" Bytes=214,748,316,710 Blocks=3,328,812 at 28-Sep-2011 22:53.

28-Sep 22:53 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 36, drive 0" command.

28-Sep 22:53 backup-dir JobId 105: Using Volume "c1_0008_0007" from 'Scratch' pool.

28-Sep 22:53 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

28-Sep 22:53 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

28-Sep 22:53 backup-sd JobId 105: 3304 Issuing autochanger "load slot 37, drive 0" command.

28-Sep 22:53 backup-sd JobId 105: 3305 Autochanger "load slot 37, drive 0", status is OK.

28-Sep 22:53 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0007" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 28-Sep 22:53 backup-sd JobId 105: New volume "c1_0008_0007" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 28-Sep-2011 22:53.

29-Sep 03:44 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

29-Sep 03:44 backup-sd JobId 105: End of medium on Volume "c1_0008_0007" Bytes=214,748,316,762 Blocks=3,328,812 at 29-Sep-2011 03:44.

29-Sep 03:44 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 37, drive 0" command.

29-Sep 03:45 backup-dir JobId 105: Using Volume "c1_0008_0008" from 'Scratch' pool.

29-Sep 03:45 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

29-Sep 03:45 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

29-Sep 03:45 backup-sd JobId 105: 3304 Issuing autochanger "load slot 38, drive 0" command.

29-Sep 03:45 backup-sd JobId 105: 3305 Autochanger "load slot 38, drive 0", status is OK.

29-Sep 03:45 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0008" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 29-Sep 03:45 backup-sd JobId 105: New volume "c1_0008_0008" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 29-Sep-2011 03:45.

29-Sep 08:47 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

29-Sep 08:47 backup-sd JobId 105: End of medium on Volume "c1_0008_0008" Bytes=214,748,316,811 Blocks=3,328,812 at 29-Sep-2011 08:47.

29-Sep 08:47 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 38, drive 0" command.

29-Sep 08:48 backup-dir JobId 105: Using Volume "c1_0008_0009" from 'Scratch' pool.

29-Sep 08:48 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

29-Sep 08:48 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

29-Sep 08:48 backup-sd JobId 105: 3304 Issuing autochanger "load slot 39, drive 0" command.

29-Sep 08:48 backup-sd JobId 105: 3305 Autochanger "load slot 39, drive 0", status is OK.

29-Sep 08:48 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0009" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 29-Sep 08:48 backup-sd JobId 105: New volume "c1_0008_0009" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 29-Sep-2011 08:48.

29-Sep 12:22 backup-sd JobId 105: End of Volume "c1_0008_0009" at 35:471652306 on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0). Write of 64512 bytes got 10285.

29-Sep 12:22 backup-sd JobId 105: End of medium on Volume "c1_0008_0009" Bytes=150,795,507,667 Blocks=2,337,480 at 29-Sep-2011 12:22.

29-Sep 12:22 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 39, drive 0" command.

29-Sep 12:22 backup-dir JobId 105: Using Volume "c1_0008_0010" from 'Scratch' pool.

29-Sep 12:22 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

29-Sep 12:22 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

29-Sep 12:22 backup-sd JobId 105: 3304 Issuing autochanger "load slot 40, drive 0" command.

29-Sep 12:22 backup-sd JobId 105: 3305 Autochanger "load slot 40, drive 0", status is OK.

29-Sep 12:22 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0008_0010" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 29-Sep 12:22 backup-sd JobId 105: New volume "c1_0008_0010" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 29-Sep-2011 12:22.

29-Sep 12:22 backup-sd JobId 105: End of Volume "c1_0008_0010" at 0:195 on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0). Write of 64512 bytes got 7996.

29-Sep 12:22 backup-sd JobId 105: End of medium on Volume "c1_0008_0010" Bytes=196 Blocks=0 at 29-Sep-2011 12:22.

29-Sep 12:22 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 40, drive 0" command.

29-Sep 12:22 backup-dir JobId 105: Using Volume "c1_0009_0001" from 'Scratch' pool.

29-Sep 12:22 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

29-Sep 12:22 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

29-Sep 12:22 backup-sd JobId 105: 3304 Issuing autochanger "load slot 1, drive 0" command.

29-Sep 12:22 backup-sd JobId 105: 3305 Autochanger "load slot 1, drive 0", status is OK.

29-Sep 12:22 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0009_0001" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 29-Sep 12:22 backup-sd JobId 105: New volume "c1_0009_0001" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 29-Sep-2011 12:22.

29-Sep 17:26 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

29-Sep 17:26 backup-sd JobId 105: End of medium on Volume "c1_0009_0001" Bytes=214,748,316,763 Blocks=3,328,812 at 29-Sep-2011 17:26.

29-Sep 17:26 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 1, drive 0" command.

29-Sep 17:26 backup-dir JobId 105: Using Volume "c1_0009_0002" from 'Scratch' pool.

29-Sep 17:26 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

29-Sep 17:26 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

29-Sep 17:26 backup-sd JobId 105: 3304 Issuing autochanger "load slot 2, drive 0" command.

29-Sep 17:26 backup-sd JobId 105: 3305 Autochanger "load slot 2, drive 0", status is OK.

29-Sep 17:26 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0009_0002" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 29-Sep 17:26 backup-sd JobId 105: New volume "c1_0009_0002" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 29-Sep-2011 17:26.

29-Sep 22:22 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

29-Sep 22:22 backup-sd JobId 105: End of medium on Volume "c1_0009_0002" Bytes=214,748,317,628 Blocks=3,328,812 at 29-Sep-2011 22:22.

29-Sep 22:22 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 2, drive 0" command.

29-Sep 22:22 backup-dir JobId 105: Using Volume "c1_0009_0003" from 'Scratch' pool.

29-Sep 22:22 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

29-Sep 22:22 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

29-Sep 22:22 backup-sd JobId 105: 3304 Issuing autochanger "load slot 3, drive 0" command.

29-Sep 22:22 backup-sd JobId 105: 3305 Autochanger "load slot 3, drive 0", status is OK.

29-Sep 22:22 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0009_0003" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 29-Sep 22:22 backup-sd JobId 105: New volume "c1_0009_0003" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 29-Sep-2011 22:22.

30-Sep 03:11 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

30-Sep 03:11 backup-sd JobId 105: End of medium on Volume "c1_0009_0003" Bytes=214,748,316,511 Blocks=3,328,812 at 30-Sep-2011 03:11.

30-Sep 03:11 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 3, drive 0" command.

30-Sep 03:11 backup-dir JobId 105: Using Volume "c1_0009_0004" from 'Scratch' pool.

30-Sep 03:11 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

30-Sep 03:11 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

30-Sep 03:11 backup-sd JobId 105: 3304 Issuing autochanger "load slot 4, drive 0" command.

30-Sep 03:11 backup-sd JobId 105: 3305 Autochanger "load slot 4, drive 0", status is OK.

30-Sep 03:11 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0009_0004" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 30-Sep 03:11 backup-sd JobId 105: New volume "c1_0009_0004" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 30-Sep-2011 03:11.

30-Sep 08:01 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

30-Sep 08:01 backup-sd JobId 105: End of medium on Volume "c1_0009_0004" Bytes=214,748,316,826 Blocks=3,328,812 at 30-Sep-2011 08:01.

30-Sep 08:01 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 4, drive 0" command.

30-Sep 08:01 backup-dir JobId 105: Using Volume "c1_0009_0005" from 'Scratch' pool.

30-Sep 08:01 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

30-Sep 08:01 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

30-Sep 08:01 backup-sd JobId 105: 3304 Issuing autochanger "load slot 5, drive 0" command.

30-Sep 08:01 backup-sd JobId 105: 3305 Autochanger "load slot 5, drive 0", status is OK.

30-Sep 08:01 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0009_0005" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 30-Sep 08:01 backup-sd JobId 105: New volume "c1_0009_0005" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 30-Sep-2011 08:01.

30-Sep 12:56 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

30-Sep 12:56 backup-sd JobId 105: End of medium on Volume "c1_0009_0005" Bytes=214,748,316,783 Blocks=3,328,812 at 30-Sep-2011 12:56.

30-Sep 12:56 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 5, drive 0" command.

30-Sep 12:57 backup-dir JobId 105: Using Volume "c1_0009_0006" from 'Scratch' pool.

30-Sep 12:57 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

30-Sep 12:57 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

30-Sep 12:57 backup-sd JobId 105: 3304 Issuing autochanger "load slot 6, drive 0" command.

30-Sep 12:57 backup-sd JobId 105: 3305 Autochanger "load slot 6, drive 0", status is OK.

30-Sep 12:57 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0009_0006" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 30-Sep 12:57 backup-sd JobId 105: New volume "c1_0009_0006" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 30-Sep-2011 12:57.

30-Sep 17:44 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

30-Sep 17:44 backup-sd JobId 105: End of medium on Volume "c1_0009_0006" Bytes=214,748,317,427 Blocks=3,328,812 at 30-Sep-2011 17:44.

30-Sep 17:44 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 6, drive 0" command.

30-Sep 17:45 backup-dir JobId 105: Using Volume "c1_0009_0007" from 'Scratch' pool.

30-Sep 17:45 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

30-Sep 17:45 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

30-Sep 17:45 backup-sd JobId 105: 3304 Issuing autochanger "load slot 7, drive 0" command.

30-Sep 17:45 backup-sd JobId 105: 3305 Autochanger "load slot 7, drive 0", status is OK.

30-Sep 17:45 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0009_0007" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 30-Sep 17:45 backup-sd JobId 105: New volume "c1_0009_0007" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 30-Sep-2011 17:45.

30-Sep 22:40 backup-sd JobId 105: User defined maximum volume capacity 214,748,364,800 exceeded on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0).

30-Sep 22:40 backup-sd JobId 105: End of medium on Volume "c1_0009_0007" Bytes=214,748,318,489 Blocks=3,328,812 at 30-Sep-2011 22:40.

30-Sep 22:40 backup-sd JobId 105: 3307 Issuing autochanger "unload slot 7, drive 0" command.

30-Sep 22:40 backup-dir JobId 105: Using Volume "c1_0009_0008" from 'Scratch' pool.

30-Sep 22:40 backup-sd JobId 105: 3301 Issuing autochanger "loaded? drive 0" command.

30-Sep 22:40 backup-sd JobId 105: 3302 Autochanger "loaded? drive 0", result: nothing loaded.

30-Sep 22:40 backup-sd JobId 105: 3304 Issuing autochanger "load slot 8, drive 0" command.

30-Sep 22:40 backup-sd JobId 105: 3305 Autochanger "load slot 8, drive 0", status is OK.

30-Sep 22:40 backup-sd JobId 105: Wrote label to prelabeled Volume "c1_0009_0008" on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) 30-Sep 22:40 backup-sd JobId 105: New volume "c1_0009_0008" mounted on device "usb-changer-drive-0" (/var/lib/bacula/c1/0/drive0) at 30-Sep-2011 22:40.

30-Sep 23:30 backup-dir JobId 105: Fatal error: sql_create.c:800 sql_create.c:800 insert INSERT INTO batch VALUES (1638658,105,'/srv/filestore/public/Employees/Debbi Wesner/RFPS Bids Contracts/','insurance cert requests for RFP 1879.pdf','P4E CAJYBG IHw B Qq IB A DvFK BAA eA BM+SJT BM+SJT BM+SJT A A C','q44Npv0UTHQpZnSiybmpS9gLMfI') failed:

Incorrect key file for table '/tmp/#sqldc7_121_0.MYI'; try to repair it 30-Sep 23:30 backup-dir JobId 105: Fatal error: catreq.c:497 attribute create error. sql_update.c:481 Update failed: affected_rows=0 for UPDATE Media SET InChanger=0, Slot=0 WHERE Slot=8 AND StorageId=2 AND MediaId!=89 02-Oct 15:33 backup-dir JobId 105: Fatal error: Network error with FD during Backup: ERR=Interrupted system call 02-Oct 15:33 backup-dir JobId 105: Fatal error: No Job status returned from FD.

02-Oct 15:33 backup-dir JobId 105: Error: Watchdog sending kill after 518423 secs to thread stalled reading File daemon.

02-Oct 15:33 backup-dir JobId 105: Fatal error: sql_get.c:373 sql_get.c:373 query SELECT VolumeName,MAX(VolIndex) FROM JobMedia,Media WHERE JobMedia.JobId=105 AND JobMedia.MediaId=Media.MediaId GROUP BY VolumeName ORDER BY 2 ASC failed:

Got error 28 from storage engine

02-Oct 15:33 backup-dir JobId 105: Error: Bacula backup-dir 5.0.2 (28Apr10): 02-Oct-2011 15:33:53

  Build OS:               x86_64-pc-linux-gnu debian squeeze/sid

  JobId:                  105

  Job:                    storage.2011-09-26_15.33.28_15

  Backup Level:           Full (upgraded from Incremental)

  Client:                 "storage-fd" x86_64-pc-linux-gnu,debian,4.0

  FileSet:                "linux-generic" 2011-09-07 14:10:13

  Pool:                   "full" (From Job resource)

  Catalog:                "MyCatalog" (From Client resource)

  Storage:                "c1" (From Pool resource)

  Scheduled time:         26-Sep-2011 15:33:24

  Start time:             26-Sep-2011 15:33:30

  End time:               02-Oct-2011 15:33:53

  Elapsed time:           6 days 23 secs

  Priority:               10

  FD Files Written:       0

  SD Files Written:       0

  FD Bytes Written:       0 (0 B)

  SD Bytes Written:       0 (0 B)

  Rate:                   0.0 KB/s

  Software Compression:   None

  VSS:                    no

  Encryption:             no

  Accurate:               no

  Volume name(s):        

  Volume Session Id:      20

  Volume Session Time:    1317057141

  Last Volume Bytes:      34,997,759,508 (34.99 GB)

  Non-fatal FD errors:    1

  SD Errors:              0

  FD termination status:  Error

  SD termination status:  Running

  Termination:            *** Backup Error ***

 

--end paste--

 

 

------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, security
threats, fraudulent activity and more. Splunk takes this data and makes
sense of it. Business sense. IT sense. Common sense.
http://p.sf.net/sfu/splunk-d2dcopy1
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Bacula-users] Canceling a job on tape ? Rerun the job, Where does bacula will append the tape ?, Phil Stracchino
Next by Date:  [Bacula-users] error backing up Exchange 2003, jbuckley
Previous by Thread:  [Bacula-users] Canceling a job on tape ? Rerun the job, Where does bacula will append the tape ?, Hugo Letemplier
Next by Thread:  Re: [Bacula-users] job dying after it finishes, Jeremy Maes
Indexes:  [Date] [Thread] [Top] [All Lists]