On Fri, May 27, 2011 at 9:27 AM, Tobias Dinse
<tobias.dinse AT stegbauer DOT info> wrote:
> I want to Import an old tape to our new Backup Server.
>
> Now I executed the follow line on the old Server(target database is from the
> new server):
>
> bscan -n bacula -u bacula -P xxxxx -h 192.168.xxx.xxx -c bacula-sd.conf
> /dev/tape/by-path/pci-0000:08:08.0-scsi-0:0:1:0-nst-nst -V DIHP01
>
> bscan: butil.c:281 Using device:
> "/dev/tape/by-path/pci-0000:08:08.0-scsi-0:0:1:0-nst-nst" for reading.
> 27-May 15:19 bscan JobId 0: Invalid slot=0 defined in catalog for Volume
> "DIHP01" on "IBM-LTO2"
> (/dev/tape/by-path/pci-0000:08:08.0-scsi-0:0:1:0-nst-nst). Manual load may
> be required.
> 27-May 15:19 bscan JobId 0: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 27-May 15:19 bscan JobId 0: 3302 Autochanger "loaded? drive 0", result is
> Slot 2.
> 27-May 15:19 bscan JobId 0: Ready to read from volume "DIHP01" on device
> "IBM-LTO2" (/dev/tape/by-path/pci-0000:08:08.0-scsi-0:0:1:0-nst-nst).
> bscan: bscan.c:482 VOL_LABEL: Media record not found for Volume: DIHP01
> bscan: bscan.c:502 VOL_LABEL: OK for Volume: DIHP01
> bscan: bscan.c:526 SOS_LABEL: Job record not found for JobId: 0
> bscan: bscan.c:1006 Could not get Client record. ERR=Client record not found
> in Catalog.
>

I have not seen that error when I have used bscan however it looks
like you need to add the old client to your bacula-dir.conf and reload
the bacula-dir configuration before the bscan.

john

John

------------------------------------------------------------------------------
vRanger cuts backup time in half-while increasing security.
With the market-leading solution for virtual backup and recovery, 
you get blazing-fast, flexible, and affordable data protection.
Download your free trial now. 
http://p.sf.net/sfu/quest-d2dcopy1
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users