Bacula-users

Re: [Bacula-users] remote Tape import

2011-05-27 09:30:27
Subject: Re: [Bacula-users] remote Tape import
From: Tobias Dinse <tobias.dinse AT stegbauer DOT info>
To: John Drescher <drescherjm AT gmail DOT com>, bacula-users AT lists.sourceforge DOT net
Date: Fri, 27 May 2011 15:27:19 +0200
I want to Import an old tape to our new Backup Server.

Now I executed the follow line on the old Server(target database is from the new server):

bscan -n bacula -u bacula -P xxxxx -h 192.168.xxx.xxx -c bacula-sd.conf /dev/tape/by-path/pci-0000:08:08.0-scsi-0:0:1:0-nst-nst -V DIHP01

bscan: butil.c:281 Using device: "/dev/tape/by-path/pci-0000:08:08.0-scsi-0:0:1:0-nst-nst" for reading.
27-May 15:19 bscan JobId 0: Invalid slot=0 defined in catalog for Volume "DIHP01" on "IBM-LTO2" (/dev/tape/by-path/pci-0000:08:08.0-scsi-0:0:1:0-nst-nst). Manual load may be required.
27-May 15:19 bscan JobId 0: 3301 Issuing autochanger "loaded? drive 0" command.
27-May 15:19 bscan JobId 0: 3302 Autochanger "loaded? drive 0", result is Slot 2.
27-May 15:19 bscan JobId 0: Ready to read from volume "DIHP01" on device "IBM-LTO2" (/dev/tape/by-path/pci-0000:08:08.0-scsi-0:0:1:0-nst-nst).
bscan: bscan.c:482 VOL_LABEL: Media record not found for Volume: DIHP01
bscan: bscan.c:502 VOL_LABEL: OK for Volume: DIHP01
bscan: bscan.c:526 SOS_LABEL: Job record not found for JobId: 0
bscan: bscan.c:1006 Could not get Client record. ERR=Client record not found in Catalog.







On 27.05.2011 13:53, John Drescher wrote:
On Fri, May 27, 2011 at 6:08 AM, Tobias Dinse
<tobias.dinse AT stegbauer DOT info> wrote:
Hi,

I want to import some Tapes from our old Autoloader (on a remote System)
into our new Backup Server Database.

The Database of the new Backup Server isnt empty. I have added the
remote Autoloader to bacula-sd.conf and status storage works fine.

How can I import the Tape Data? I took a look @bscan but i dont know how
I can use it to import from a Remote Storage.

Example:

./bscan -V TestVolume1 -v -s -m -c bacula-sd.conf /dev/nst0


/dev/nst0 doesnt work because its a remote Storage.

If the tape exists on the remote device can't you add the remote
bacula-sd to the new director. Or am I missing something?

John
------------------------------------------------------------------------------
vRanger cuts backup time in half-while increasing security.
With the market-leading solution for virtual backup and recovery, 
you get blazing-fast, flexible, and affordable data protection.
Download your free trial now. 
http://p.sf.net/sfu/quest-d2dcopy1
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
<Prev in Thread] Current Thread [Next in Thread>