Thank you, I changed it from Fullset to another option I had
predefined but forgot to switch to it. I changed it to WinXPtest which
pointed to C:/jaketestfolder

Ran it without a hitch! Thanks everyone I appreciate the help.

On Thu, May 12, 2011 at 10:40 AM, John Drescher <drescherjm AT gmail DOT com> 
wrote:
> On Thu, May 12, 2011 at 11:35 AM, Jake Debord <jake.debord AT gmail DOT com> 
> wrote:
>> Sure, here you go:
>>
>> #
>> # Default Bacula Director Configuration file
>> #
>> #  The only thing that MUST be changed is to add one or more
>> #   file or directory names in the Include directive of the
>> #   FileSet resource.
>> #
>> #  For Bacula release 5.0.2 (28 April 2010) -- ubuntu 10.10
>> #
>> #  You might also want to change the default email address
>> #   from root to your address.  See the "mail" and "operator"
>> #   directives in the Messages resource.
>> #
>>
>> Director {                            # define myself
>>  Name = DoraleeII-dir
>>  DIRport = 9101                # where we listen for UA connections
>>  QueryFile = "/etc/bacula/scripts/query.sql"
>>  WorkingDirectory = "/var/lib/bacula"
>>  PidDirectory = "/var/run/bacula"
>>  Maximum Concurrent Jobs = 1
>>  Password = "*********"         # Console password
>>  Messages = Daemon
>>  #DirAddress = 127.0.0.1
>> }
>>
>> JobDefs {
>>  Name = "DefaultJob"
>>  Type = Backup
>>  Level = Incremental
>>  Client = DoraleeII-fd
>>  FileSet = "Full Set"
>>  Schedule = "WeeklyCycle"
>>  Storage = File
>>  Messages = Standard
>>  Pool = File
>>  Priority = 10
>>  Write Bootstrap = "/var/lib/bacula/%c.bsr"
>> }
>>
>>
>> #
>> # Define the main nightly save backup job
>> #   By default, this job will back up to disk in
>> /nonexistant/path/to/file/archive/dir
>> Job {
>>  Name = "BackupClient1"
>>  JobDefs = "DefaultJob"
>> }
>>
>> #Job {
>> #  Name = "BackupClient2"
>> #  Client = DoraleeII2-fd
>> #  JobDefs = "DefaultJob"
>> #}
>>
>> # Backup the catalog database (after the nightly save)
>> Job {
>>  Name = "BackupCatalog"
>>  JobDefs = "DefaultJob"
>>  Level = Full
>>  FileSet="Catalog"
>>  Schedule = "WeeklyCycleAfterBackup"
>>  # This creates an ASCII copy of the catalog
>>  # Arguments to make_catalog_backup.pl are:
>>  #  make_catalog_backup.pl <catalog-name>
>>  RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
>>  # This deletes the copy of the catalog
>>  RunAfterJob  = "/etc/bacula/scripts/delete_catalog_backup"
>>  Write Bootstrap = "/var/lib/bacula/%n.bsr"
>>  Priority = 11                   # run after main backup
>> }
>>
>> #
>> # Standard Restore template, to be changed by Console program
>> #  Only one such job is needed for all Jobs/Clients/Storage ...
>> #
>> Job {
>>  Name = "RestoreFiles"
>>  Type = Restore
>>  Client=DoraleeII-fd
>>  FileSet="Full Set"
>>  Storage = File
>>  Pool = Default
>>  Messages = Standard
>>  Where = /nonexistant/path/to/file/archive/dir/bacula-restores
>> }
>>
>>
>> # List of files to be backed up
>> FileSet {
>>  Name = "Full Set"
>>  Include {
>>    Options {
>>      signature = MD5
>>    }
>> #
>> #  Put your list of files here, preceded by 'File =', one per line
>> #    or include an external list with:
>> #
>> #    File = <file-name
>> #
>> #  Note: / backs up everything on the root partition.
>> #    if you have other partitions such as /usr or /home
>> #    you will probably want to add them too.
>> #
>> #  By default this is defined to point to the Bacula binary
>> #    directory to give a reasonable FileSet to backup to
>> #    disk storage during initial testing.
>> #
>> #    File = /usr/sbin
>>  }
>>
>> #
>> # If you backup the root directory, the following two excluded
>> #   files can be useful
>> #
>>  Exclude {
>>    File = /var/lib/bacula
>>    File = /nonexistant/path/to/file/archive/dir
>>    File = /proc
>>    File = /tmp
>>    File = /.journal
>>    File = /.fsck
>>  }
>> }
>>
>
> There is nothing in the "Full Set"
>
>> #
>> # When to do the backups, full backup on first sunday of the month,
>> #  differential (i.e. incremental since full) every other sunday,
>> #  and incremental backups other days
>> Schedule {
>>  Name = "WeeklyCycle"
>>  Run = Full 1st sun at 23:05
>>  Run = Differential 2nd-5th sun at 23:05
>>  Run = Incremental mon-sat at 23:05
>> }
>>
>> # This schedule does the catalog. It starts after the WeeklyCycle
>> Schedule {
>>  Name = "WeeklyCycleAfterBackup"
>>  Run = Full sun-sat at 23:10
>> }
>>
>> # This is the backup of the catalog
>> FileSet {
>>  Name = "Catalog"
>>  Include {
>>    Options {
>>      signature = MD5
>>    }
>>    File = "/var/lib/bacula/bacula.sql"
>>  }
>> }
>>
>> # Client (File Services) to backup
>> Client {
>>  Name = DoraleeII-fd
>>  Address = localhost
>>  FDPort = 9102
>>  Catalog = MyCatalog
>>  Password = "**********"          # password for FileDaemon
>>  File Retention = 30 days            # 30 days
>>  Job Retention = 6 months            # six months
>>  AutoPrune = yes                     # Prune expired Jobs/Files
>> }
>>
>> #
>> # Second Client (File Services) to backup
>> #  You should change Name, Address, and Password before using
>> #
>> #Client {
>> #  Name = DoraleeII2-fd
>> #  Address = localhost2
>> #  FDPort = 9102
>> #  Catalog = MyCatalog
>> #  Password = "uDZsFQvCq2wvRs986stkk77AEKvrEoWL-2"         # password
>> for FileDaemon 2
>> #  File Retention = 30 days            # 30 days
>> #  Job Retention = 6 months            # six months
>> #  AutoPrune = yes                     # Prune expired Jobs/Files
>> #}
>>
>>
>> # Definition of file storage device
>> Storage {
>>  Name = File
>> # Do not use "localhost" here
>>  Address = 10.0.6.103
>>  SDPort = 9102
>>  Password = ********
>>  Device = FileStorage
>>  Media Type = File
>>  Maximum Concurrent Jobs = 10
>> }
>>
>>
>>
>> # Definition of DDS tape storage device
>> #Storage {
>> #  Name = DDS-4
>> #  Do not use "localhost" here
>> #  Address = localhost                # N.B. Use a fully qualified name here
>> #  SDPort = 9103
>> #  Password = "mWlTPo7Qv_FvQgignt89iLcNuHIZFCpZn"          # password
>> for Storage daemon
>> #  Device = DDS-4                      # must be same as Device in
>> Storage daemon
>> #  Media Type = DDS-4                  # must be same as MediaType in
>> Storage daemon
>> #  Autochanger = yes                   # enable for autochanger device
>> #}
>>
>> # Definition of 8mm tape storage device
>> #Storage {
>> #  Name = "8mmDrive"
>> #  Do not use "localhost" here
>> #  Address = localhost                # N.B. Use a fully qualified name here
>> #  SDPort = 9103
>> #  Password = "mWlTPo7Qv_FvQgignt89iLcNuHIZFCpZn"
>> #  Device = "Exabyte 8mm"
>> #  MediaType = "8mm"
>> #}
>>
>> # Definition of DVD storage device
>> #Storage {
>> #  Name = "DVD"
>> #  Do not use "localhost" here
>> #  Address = localhost                # N.B. Use a fully qualified name here
>> #  SDPort = 9103
>> #  Password = "mWlTPo7Qv_FvQgignt89iLcNuHIZFCpZn"
>> #  Device = "DVD Writer"
>> #  MediaType = "DVD"
>> #}
>>
>>
>> # Generic catalog service
>> Catalog {
>>  Name = MyCatalog
>> # Uncomment the following line if you want the dbi driver
>> # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport =
>>  dbname = bacula; DB Address = ""; dbuser = "**********"; dbpassword
>> = "************"
>> }
>>
>> # Reasonable message delivery -- send most everything to email address
>> #  and to the console
>> Messages {
>>  Name = Standard
>> #
>> # NOTE! If you send to two email or more email addresses, you will need
>> #  to replace the %r in the from field (-f part) with a single valid
>> #  email address in both the mailcommand and the operatorcommand.
>> #  What this does is, it sets the email address that emails would display
>> #  in the FROM field, which is by default the same email as they're being
>> #  sent to.  However, if you send email to more than one address, then
>> #  you'll have to set the FROM address manually, to a single address.
>> #  for example, a 'no-reply AT mydomain DOT com', is better since that tends 
>> to
>> #  tell (most) people that its coming from an automated source.
>>
>> #
>>  mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\)
>> \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r"
>>  operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f
>> \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
>>  mail = root@localhost = all, !skipped
>>  operator = root@localhost = mount
>>  console = all, !skipped, !saved
>> #
>> # WARNING! the following will create a file that you must cycle from
>> #          time to time as it will grow indefinitely. However, it will
>> #          also keep all your messages if they scroll off the console.
>> #
>>  append = "/var/lib/bacula/log" = all, !skipped
>>  catalog = all
>> }
>>
>>
>> #
>> # Message delivery for daemon messages (no job).
>> Messages {
>>  Name = Daemon
>>  mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\)
>> \<%r\>\" -s \"Bacula daemon message\" %r"
>>  mail = root@localhost = all, !skipped
>>  console = all, !skipped, !saved
>>  append = "/var/lib/bacula/log" = all, !skipped
>> }
>>
>> # Default pool definition
>> Pool {
>>  Name = Default
>>  Pool Type = Backup
>>  Recycle = yes                       # Bacula can automatically recycle 
>> Volumes
>>  AutoPrune = yes                     # Prune expired volumes
>>  Volume Retention = 365 days         # one year
>> }
>>
>> # File Pool definition
>> Pool {
>>  Name = File
>>  Pool Type = Backup
>>  Recycle = yes                       # Bacula can automatically recycle 
>> Volumes
>>  AutoPrune = yes                     # Prune expired volumes
>>  Volume Retention = 365 days         # one year
>>  Maximum Volume Bytes = 50G          # Limit Volume size to something
>> reasonable
>>  Maximum Volumes = 100               # Limit number of Volumes in Pool
>> }
>>
>>
>> # Scratch pool definition
>> Pool {
>>  Name = Scratch
>>  Pool Type = Backup
>> }
>>
>> #
>> # Restricted console used by tray-monitor to get the status of the director
>> #
>> Console {
>>  Name = DoraleeII-mon
>>  Password = "yklPd1FbkymAEbSSZ3MrHD6zUI3ZG3EWP"
>>  CommandACL = status, .status
>> }
>> Client {
>>  Name = jake-laptop-fd
>>  Password = **********
>>  Address = 10.0.6.107
>>  FDPort = 9102
>>  Catalog = MyCatalog
>>  File Retention = 30 days
>>  Job Retention = 6 months
>> }
>> FileSet {
>>  Name = WinXPTest
>>  Include {
>>    File = C:/jaketestfolder
>>    Options {
>>    }
>>  }
>> }
>
> I believe you should omit Options if you are not using any. Or better
> yet use the following Options:
>
>  Options {
>  signature = MD5
>  }
>
>> Job {
>>  Name = XPtest
>>  Type = Backup
>>  Level = Incremental
>>  Client = jake-laptop-fd
>>  FileSet = "Full Set"
>>  Schedule = WeeklyCycle
>>  Storage = File
>>  Pool = Default
>>  Messages = Standard
>> }
>>
>>
>
> Your File Set for the XPtest is "Full Set" which is does not have any
> folders to backup.
>

------------------------------------------------------------------------------
Achieve unprecedented app performance and reliability
What every C/C++ and Fortran developer should know.
Learn how Intel has extended the reach of its next-generation tools
to help boost performance applications - inlcuding clusters.
http://p.sf.net/sfu/intel-dev2devmay
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users