Re: [Bacula-users] fixing a 'Cannot find any appendable volumes' problem
2011-04-28 08:40:25
Am Donnerstag, 28. April 2011, 06:13:53 schrieb David Newman:
> bacula 5.0.3, FreeBSD 8.2
>
> While running a full backup of a file server, bacula keeps issuing
> 'Cannot find any appendable volumes' messages and prompting me to create
> a new volume. I've done that, three times, and tried rerunning the job
> but now the NAS unit attached to the bacula box is nearly full (mostly
> with hundreds of volumes from aborted full backups of this server).
>
> I don't care if this job wraps around from the final volume and starts
> overwriting the first and subsequent volumes. How can I configure bacula
> to do that so that this job can run to completion?
You give few informations bout your config or settings.
I guess you missconfigured the pool definition of your job e.g. volume
retention.
Check if you have lines similar to the following inside your pool definition...
AutoPrune = yes
VolumeRetention = 14d
Maximum Volumes = 15
Recycle = yes
Best wishes
Heiko
--
Dipl. Inf. Heiko Schellhorn
University of Bremen
Inst. of Environmental Physics
P.O. Box 33 04 40
D-28334 Bremen
Germany
------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management toolset available today. Delivers lowest initial
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|