On Fri, 15 Apr 2011 13:04:22 -0700, dieruffgrad said:
I have installed bacula 5.0.3 on opensuse 11.3 64bit. I have been able to
backup to file, and restore from a file backup with no problem. I now have
an HP 72x6 dat external tape drive that I would like to use. I am kind of
lost on how to configure bacula you use a tape drive. I know the device is
dev/st0, but not to sure were to go from there.
There are some example tape configs in the default bacula-sd.conf. Note also
that Bacula should use /dev/nst0, not /dev/st0.
I suggest you run the tape tests described here:
http://www.bacula.org/5.0.x-manuals/en/problems/problems/Testing_Your_Tape_Drive.html
__Martin
I have ran the tape tests described, they all worked. My problem was more with
the autochager. Once I figured out that in the bacula-dir.conf under
autochanger not to specify the device, rather than just setup autochanger in
the bacula-sd.conf and reference it that way. It is working now. Also I tried
/dev/nst0 which failed the tape tests, but /dev/st0 worked.
+----------------------------------------------------------------------
|This was sent by trizzotto AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|