---------- Forwarded message ----------
From: John Drescher <drescherjm AT gmail DOT com>
Date: Wed, Apr 13, 2011 at 12:38 PM
Subject: Re: [Bacula-users] Dell PowerVault 124T tape drive
To: Steffen Fritz <fritzsf AT googlemail DOT com>
On Wed, Apr 13, 2011 at 12:37 PM, John Drescher <drescherjm AT gmail DOT com>
wrote:
> On Wed, Apr 13, 2011 at 7:48 AM, Steffen Fritz <fritzsf AT googlemail DOT
> com> wrote:
>> Hey folks,
>>
>>
>> something strange is happening within my bacula configuration. Every help is
>> much appreciated!
>>
>> 1. This is, what bconsole--> status tells me about my tape drive. No pool?
>>
>> Device "Drive-1" (/dev/nst0) is mounted with:
>> Volume: sonntag
>> Pool: *unknown*
>> Media type: LTO-4
>> Drive 0 status unknown.
>> Total Bytes Read=0 Blocks Read=0 Bytes/block=0
>> Positioned at File=0 Block=0
>> ====
>>
>> Used Volume status:
>> sonntag on device "Drive-1" (/dev/nst0)
>> Reader=0 writers=0 devres=0 volinuse=0
>>
>>
>>
>>
>> So, I can't update via update, right? How can I add a pool afterwards?
>>
>
> I see this often if no jobs have executed on the loaded tape since it
> was loaded. I have found this to be mostly harmless.
>
Or at least I used to see this. I do not pay much attention to that.
John
--
John M. Drescher
------------------------------------------------------------------------------
Forrester Wave Report - Recovery time is now measured in hours and minutes
not days. Key insights are discussed in the 2010 Forrester Wave Report as
part of an in-depth evaluation of disaster recovery service providers.
Forrester found the best-in-class provider in terms of services and vision.
Read this report now! http://p.sf.net/sfu/ibm-webcastpromo
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
