Also, when you run the backup see if it says "waiting for client to connect to Storage" as it will indicate the problem I described.

On Fri, Feb 18, 2011 at 2:54 PM, Raymond Norton <admin AT lctn DOT org> wrote:

 Just setup bacula on a new Ubuntu install. Local backups work fine,
but a new server 2003 client cannot connect to the sd. I can telnet to
the bacula box from the client on ports 9101, and 9103, check status of
client, and estimate files, but cannot get backups to work.

Backups is being done across different subnets with firewalls.



Director message

18-Feb 14:32 maccraysrv1 JobId 37: Fatal error: Authorization key
rejected by Storage daemon.

SD debug:

FD to contact SD key=MEOG-LINO-NHJF-NHBL-DFNE-AGCE-EMJB-IJKA
maccray-sd: bnet.c:669-0 who=client host=x.x.x.x port=36643
maccray-sd: dircmd.c:180-0 Hello Start Job
maccraysrv1.2011-02-18_14.32.05_08
maccray-sd: job.c:256-0 Found Job maccraysrv1.2011-02-18_14.32.05_08
maccray-sd: cram-md5.c:73-0 send: auth cram-md5
<773139261.1298061128@maccray-sd> ssl=0
maccray-sd: cram-md5.c:89-0 Bnet receive challenge response error.
maccray-sd: authenticate.c:236-0 cram-auth failed with client
maccray-sd: job.c:275-0 Authentication failed Job
maccraysrv1.2011-02-18_14.32.05_08
maccray-sd: job.c:221-0 Auth=0 canceled=1 errstat=0
maccray-sd: jcr.c:181-0 write_last_jobs seek to 188
maccray-sd: bnet.c:669-0 who=client host=10.10.1.49 port=36643
maccray-sd: cram-md5.c:73-0 send: auth cram-md5
<1772066074.1298061316@maccray-sd> ssl=0
maccray-sd: cram-md5.c:133-0 cram-get received: auth cram-md5
<806633973.1298061316@maccray-dir> ssl=0
maccray-sd: cram-md5.c:152-0 sending resp to challenge:
qS+nZG+aZ1NVj//bS5NVMB
maccray-sd: dircmd.c:211-0 Message channel init completed.


------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.