Hello together,

i have problem with "maximum current jobs". i have tried to change to
various numbers.
bacula is only running 2 jobs in parallel. also job priority is in every
job the same.

here is my setup.
i have a nec LTO4 T40A2 auto changer connected via FC and one NEC LTO2
with one drive 8 slots auto changer.
this means i can run 3 jobs in parallel (3 Tape drives)


now bacula is only running 2 jobs parallel on the T40A2, and the LTO2
Auto changer says waiting for execution, following jobs for the LTO2
device are in state "waiting for max Storage Jobs"

if i start a job manually if the T40A2 is idle, the the job starts
without problems on the lto2 drive.

does some have an idea?

many thanks in  advance.

Andre

------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users