On Thu, Feb 03, 2011 at 04:40:58PM +0100, Richard Marnau wrote:
> > On Thu, Feb 03, 2011 at 03:52:15PM +0100, Richard Marnau wrote:
> > > > On Thu, Feb 03, 2011 at 03:21:35PM +0100, Richard Marnau wrote:
> > > > > > >>>>> On Wed, 2 Feb 2011 16:13:49 +0100, Richard Marnau said:
> > > > > > >
> > > > > > > 2. ========= Bscan the related archives ===========
> > > > > > >
> > > > > > > bscan -p -s -v -P xxxx -h localhost Backupserver -V
> > > > > > Vol0039\|Vol0045\|Vol0094
> > > > > > >
> > > > > > > Records would have been added or updated in the catalog:
> > > > > > > 3 Media
> > > > > > > 3 Pool
> > > > > > > 54 Job
> > > > > > > 352620 File
> > > > > > > root@mond:~# bconsole
> > > > > > > Connecting to Director localhost:9101
> > > > > > >
> > > > > > > =========== But still I cannot browse the files on the
> > volume...
> > > > > > >
> > > > > > > "For one or more of the JobIds selected, no files were found,
> > > > > > > so file selection is not possible. Most likely your retention
> > > > policy
> > > > > > pruned the files."
> > > > > >
> > > > > > It could be this bug:
> > > > > >
> > > > > > http://www.mail-archive.com/bacula-
> > > > > > users AT lists.sourceforge DOT net/msg44944.html
> > > > > >
> > > > >
> > > > > Martin, thanks for the hint. I will check that ..
> > > > >
> > > > > > > ============== Could it be related to the following output?
> > > > > > >
> > > > > > > bscan: bscan.c:637 End of all Volumes. VolFiles=10
> > VolBlocks=0
> > > > > > VolBytes=44,246,214,007
> > > > > > > 02-Feb 15:27 bscan JobId 0: Error: 47 block read errors not
> > > > printed.
> > > > > >
> > > > > > That might cause a few missing files, but the majority should
> > be
> > > > > > available.
> > > > > > Are these tape or disk volumes?
> > > > >
> > > > > Disk Volumes on an smb share (software raid1).
> > > > > I already checked the harddrives, but they seems to be fine.
> > > > >
> > > > > Something is very odd with my database. I walk through yesterday
> > > > backups but not even 1 week old volumes.
> > > > >
> > > > > =======
> > > > > Select the Client (1-25): 18
> > > > > Automatically selected FileSet: FullWindows
> > > > > +-------+-------+----------+----------------+--------------------
> > -+--
> > > > -----------+
> > > > > | JobId | Level | JobFiles | JobBytes | StartTime
> > |
> > > > VolumeName |
> > > > > +-------+-------+----------+----------------+--------------------
> > -+--
> > > > -----------+
> > > > > | 1,631 | F | 232,077 | 63,158,041,709 | 2011-01-03 00:46:38
> > |
> > > > Yearly0887 |
> > > > > | 1,631 | F | 232,077 | 63,158,041,709 | 2011-01-03 00:46:38
> > |
> > > > Yearly0898 |
> > > > > | 1,915 | D | 12,237 | 5,763,031,019 | 2011-01-31 00:11:23
> > |
> > > > Monthly0901 |
> > > > > +-------+-------+----------+----------------+--------------------
> > -+--
> > > > -----------+
> > > > > You have selected the following JobIds: 1631,1915
> > > > >
> > > > > Building directory tree for JobId(s) 1631,1915 ... ++
> > > > > --
> > > > >
> > > > > For one or more of the JobIds selected, no files were found,
> > > > > so file selection is not possible.
> > > > > Most likely your retention policy pruned the files.
> > > > >
> > > > > =======
> > > > > I did now setup a new bacula server and try rebuild the database
> > > > using bscan.
> > > > > It's a good exercise anyway, but I really need to fix and
> > understand
> > > > the main problem.
> > > > > There is nothing worse than a unreliable backup system.
> > > >
> > > > What have you got set for 'File retention'?
> > >
> > > >From the pool:
> > >
> > > Volume Retention = 370 days # one year
> > > File Retention = 370 days # one year
> > > Job Retention = 370 days # one year
> > >
> > > >From bconsole:
> > >
> > > Pool: YearlyRotation
> > > +---------+------------+-----------+---------+----------------+------
> > ----+--------------+---------+------+-----------+-----------+----------
> > -----------+
> > > | MediaId | VolumeName | VolStatus | Enabled | VolBytes |
> > VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType |
> > LastWritten |
> > > +---------+------------+-----------+---------+----------------+------
> > ----+--------------+---------+------+-----------+-----------+----------
> > -----------+
> > > | 865 | Vol0865 | Used | 1 | 509,904,466 |
> > 0 | 11,232,000 | 0 | 0 | 0 | File | 2010-11-03
> > 23:50:40 |
> > > | 887 | Yearly0887 | Full | 1 | 53,687,038,081 |
> > 12 | 31,968,000 | 1 | 0 | 0 | File | 2011-01-03
> > 03:18:35 |
> > > | 894 | Yearly0894 | Full | 1 | 53,687,043,318 |
> > 12 | 31,968,000 | 1 | 0 | 0 | File | 2010-12-06
> > 02:06:16 |
> > > | 895 | Yearly0895 | Full | 1 | 53,687,032,874 |
> > 12 | 31,968,000 | 1 | 0 | 0 | File | 2011-01-03
> > 00:39:27 |
> > > | 898 | Yearly0898 | Append | 1 | 23,144,111,901 |
> > 5 | 31,968,000 | 1 | 0 | 0 | File | 2011-01-29
> > 02:50:53 |
> > > +---------+------------+-----------+---------+----------------+------
> > ----+--------------+---------+------+-----------+-----------+----------
> > -----------+
> > >
> > > >From the Job:
> > >
> > > 03-Jan 03:53 mond-dir JobId 1631: Begin pruning Jobs older than 1
> > year 5 days .
> > > 03-Jan 03:53 mond-dir JobId 1631: No Jobs found to prune.
> > > 03-Jan 03:53 mond-dir JobId 1631: Begin pruning Jobs.
> > > 03-Jan 03:53 mond-dir JobId 1631: No Files found to prune.
> > > 03-Jan 03:53 mond-dir JobId 1631: End auto prune.
> > >
> > >
> > > ... that's what I don't get. I proberly miss something but where is
> > the file index gone ?!?!
> >
> > Do the file retentions look correct in the mysql database?
> > What do you get in the Retention columns if you do this command in
> > mysql?
> >
> > select * from Client;
> >
>
>
> | 4 | maximum-fd | 5.0.2 (28Apr10)
> Linux,Cross-compile,Win32 | 1 | 5,184,000 |
> 15,552,000 |
>
> Good one! The results are interesting ..
> For some reason all clients do have the same file and job retention set.
Divide by 86400 (60s * 60m * 24h), and that looks like the file retention is 60
days, and the job retention is 180 days.
Bacula doesn't update the database with changes to config files automatically,
and a bacula "reload" doesn't do it either. I think you probably need to figure
out the right "update" command to run from bconsole, and I can't tell you what
that is because I don't know.
------------------------------------------------------------------------------
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solution at an even better price-free!
Download using promo code Free_Logger_4_Dev2Dev. Offer expires
February 28th, so secure your free ArcSight Logger TODAY!
http://p.sf.net/sfu/arcsight-sfd2d
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
