Hi,
I am having strange problem with autochanger setup, previously working.
Bacula version 5.0.2
Autochanger is Quantum SuperLoader3 with barcode reader, 16 slots,
15LTO4 + 1 cln.
Situation:
- nothing mounted
- no other waiting or running jobs
- everything labeled, autochanger tested & working
- sheduled one simple job to full backup one single file
- autochanger waittime is 300s
Summary:
bacula started job, loaded the right volume and then requested to mount
the same by operator !? See the log. Last message repeats.
Could anybody help with that? Why is it asking to mount Volume or label
new one?
The job log:
2010-09-10 16:25:54
pc23-dir
Using Device "Superloader3"
2010-09-10 16:25:54
pc23-sd
3301 Issuing autochanger "loaded? drive 0" command.
2010-09-10 16:25:54
pc23-dir
Start Backup JobId 264, Job=test.2010-09-10_16.25.52_05
2010-09-10 16:25:56
pc23-sd
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 3, drive 0" command.
2010-09-10 16:27:04
pc23-sd
3305 Autochanger "load slot 3, drive 0", status is OK.
2010-09-10 16:27:14
pc23-sd
Please mount Volume "KYJ433L4" or label a new one for:
Job: test.2010-09-10_16.25.52_05
Storage: "Superloader3" (/dev/nst0)
Pool: Default
Media type: LTO-4
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
