On 09/07/10 11:09, Eduardo Júnior wrote:
> Hi,
>
>
> 2010/9/6 John Drescher<drescherjm AT gmail DOT com>:
>> 2010/9/6 Eduardo Júnior<ihtraum18 AT gmail DOT com>:
>>> Hi,
>>>
>>>
>>> I use bacula-director 2.4.4 on Debian Lenny Box.
>>>
>>> Why after a restart or reload of the daemon director
>>> (/etc/init.d/bacula-director)
>>> all jobs running are lost?
>>>
>>> Is it possible avoid this?
>> Why are you restarting the director when jobs are running. Do not do
>> that. If you changed the configuation and want to apply that use the
>> reload command in bacula. Make sure you test your config file first
>> with
>>
>> bacula-dir -t /etc/bacula/bacula-dir.conf
> This isn' usually, restart the director when jobs are running.
> Sometimes in the evening I need do changes and I have an
> interval time do re-running jobs that were lost.
>
> So, reload command is sufficient and the jobs in execution will
> no be lost?
>
> Thanks,
>
Correct, running jobs will not be lost and their execution will not be 
stopped when you use the reload command.  However, keep in mind John's 
comment about testing the config with 'bacula-dir -t' first - a config 
error will result in the director crashing when you issue the reload 
command.


------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users