Hello Steve

Thanks. Tapeinfo output is on my first message (as well as other 
troubleshooting info). It says 'DataCompEnabled: yes'.

Cheers,
Rodrigo

-----Mensagem original-----
De: Steve Ellis [mailto:ellis AT brouhaha DOT com] 
Enviada em: quarta-feira, 1 de setembro de 2010 14:48
Para: bacula-users AT lists.sourceforge DOT net
Assunto: Re: [Bacula-users] RES: LTO-3 tape not compressing data/premature end 
of tape space

  On 9/1/2010 7:09 AM, Brian Debelius wrote:
>    Is Maximum Volume Bytes set in the catalog for these tapes?
>
> On 9/1/2010 9:15 AM, Rodrigo Ferraz wrote:
>> Certainly. The schedule comprises 6 different tapes, between monthly and 
>> weekly pools, and the problem is exactly the same with all of them.
>>
>> Rodrigo
>>
If you have the 'tapeinfo' command you can also check to see if the generic 
SCSI device has HW compression enabled (shows up as DataCompEnabled in my 
environment).

-se

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users