Bacula-users

[Bacula-users] Bad autochanger errors on Bacula 5.0.2

2010-08-06 14:34:47
Subject: [Bacula-users] Bad autochanger errors on Bacula 5.0.2
From: Win Htin <win.htin AT gmail DOT com>
To: bacula-users AT lists.sourceforge DOT net
Date: Fri, 6 Aug 2010 14:32:30 -0400
Hi folks,

I am trying to setup a new IBM TS3200 library running on CentOS 5.5 64
bit. The Bacula version is 5.0.2 and the tape drives are LTO4s. I have
successfully setup a couple of other exact type libraries in the past
and had no issues albeit running older Bacula 2.4.X version. I went
through exact same steps I have kept as my documentation and it is
stumping me at the last stage where I cannot label the new tapes. I
noticed in the older version mtx-changer did not read mtx-changer.conf
file. I tried to compare the two and adjusted as necessary but still
no go. Any ideas? TIA.

## Error message from bconsole:
*label barcodes Storage=TS3200_1_DRV1 Pool=Scratch Slots=1
Connecting to Storage daemon TS3200_1_DRV1 at baculaserver:9103 ...
3306 Issuing autochanger "slots" command.
Device "LTO4_1" has 47 slots.
Connecting to Storage daemon TS3200_1_DRV1 at baculaserver:9103 ...
3306 Issuing autochanger "list" command.
The following Volumes will be labeled:
Slot  Volume
==============
   1  000001
Do you want to label these Volumes? (yes|no): yes
Connecting to Storage daemon TS3200_1_DRV1 at baculaserver:9103 ...
Sending label command for Volume "000001" Slot 1 ...
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 1, drive 0" command.
3992 Bad autochanger "load slot 1, drive 0": ERR=Child died from
signal 15: Termination.
Results=Program killed by Bacula (timeout)

Label command failed for Volume 000001.


## mtx.log shows:
20100806-14:14:30 Parms: /dev/sg22 loaded 1 /dev/nst0 0
20100806-14:14:30 Doing mtx -f /dev/sg22 0 -- to find what is loaded
20100806-14:14:30 Parms: /dev/sg22 load 1 /dev/nst0 0
20100806-14:14:30 Doing mtx -f /dev/sg22 load 1 0
20100806-14:15:16 The return value for load is 0
20100806-14:15:16 Device /dev/nst0 - not ready, retrying...
20100806-14:15:17 Device /dev/nst0 - not ready, retrying...
20100806-14:15:18 Device /dev/nst0 - not ready, retrying...

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

<Prev in Thread] Current Thread [Next in Thread>