Note that my ‘Maximum Concurrent Jobs’
directive is set to ‘3’.
Storage { #
definition of myself
Name = bacula01-sd
SDPort = 9103 #
Director's port
WorkingDirectory =
"/etc/bacula/working"
Pid Directory = "/var/run"
Maximum Concurrent Jobs = 3
}
From: Jeremiah D.
Jester [mailto:jjest AT u.washington DOT edu]
Sent: Thursday, July 29, 2010 1:39
PM
To: bacula-users
Subject: [Bacula-users] 2nd tape
drive not running.
I had a back log of jobs that were in the running que
yesterday, consequently both tape drives were writing to tape. However, today
with only a few jobs in the running jobs que, only the one drive seems to be
‘running’. Is there a parameter somewhere that I can tweak so that the 2nd
drive will always initiate a backup if more than than 1 runnings jobs are in
the que?
Thanks,
Jj
JobId Level
Name
Status
======================================================================
465 Full
magnum-onsite.2010-07-28_21.00.00_11 is running
466 Increme
kojak-onsite.2010-07-28_22.00.00_24 is waiting on max Storage jobs
467 Full
grey-onsite.2010-07-28_22.00.00_25 is waiting on max Storage jobs
468 Increme red-onsite.2010-07-28_22.00.00_26
is waiting on max Storage jobs
469 Full
magnum-offsite.2010-07-29_02.00.00_15 is waiting on max Storage jobs
Device status:
Autochanger "ADIC_Scalar_24" with devices:
"Drive1" (/dev/nst0)
"Drive2" (/dev/nst1)
Device "Drive1" (/dev/nst0) is mounted with:
Volume:
KL0455
Pool: *unknown*
Media type: LTO2
Slot 12 is loaded in drive 0.
Total Bytes=432,372,584,448
Blocks=6,702,203 Bytes/block=64,512
Positioned at File=432 Block=6,204
Device "Drive2" (/dev/nst1) is mounted with:
Volume:
000090
Pool: *unknown*
Media type: LTO2
Slot 10 is loaded in drive 1.
Total Bytes Read=64,512 Blocks Read=1
Bytes/block=64,512
Positioned at File=0 Block=0
Device "FileStorage" (/tmp) is not open.
Jeremiah Jester
Senior Informatics Specialist
UW Microbiology - Katze Lab
Box 357242
P: 206-732-6185