|
Re: [Bacula-users] unable to use dell tl4000
2009-12-23 18:40:02
Ismail OZATAY wrote:
>> John Drescher wrote:
>>> On Tue, Dec 22, 2009 at 9:46 AM, Ismail OZATAY
>>> <ismail AT ismailozatay DOT net> wrote:
>>>> Hello ,
>>>>
>>>> I bought a dell tl4000 tape libray with 2 drives. I am trying to use it
>>>> and search and applied some example configs but i get some errors. I
>>>> have put "AutomaticMount=yes" option but it wants me to mount it
>>>> manually.Here is my configs ;
>>>>
>>>> Pool {
>>>> Name = SenelikPool
>>>> Pool Type = Backup
>>>> Recycle = yes
>>>> AutoPrune = yes
>>>> Volume Retention = 365d
>>>> Label Format = Full-
>>>> }
>>>>
>>>> bacula-sd.conf
>>>>
>>>> Autochanger {
>>>> Name = delltl4000
>>>> Device = Drive-1, Drive-2
>>>> Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
>>>> Changer Device = /dev/sg5
>>>> }
>>>>
>>>> Device {
>>>> Name = Drive-1
>>>> Drive Index = 0
>>>> Media Type = LTO4
>>>> Archive Device = /dev/st0
>>>> Changer Device = /dev/sg5
>>>> AutomaticMount = yes;
>>>> AlwaysOpen = yes;
>>>> RemovableMedia = yes;
>>>> RandomAccess = no;
>>>> AutoChanger = yes;
>>>> LabelMedia = yes;
>>>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>> }
>>>>
>>>> Device {
>>>> Name = Drive-2
>>>> Drive Index = 1
>>>> Media Type = LTO4
>>>> Archive Device = /dev/st1
>>>> Changer Device = /dev/sg5
>>>> AutomaticMount = yes;
>>>> Autochanger = yes;
>>>> AlwaysOpen = yes;
>>>> RemovableMedia = yes;
>>>> RandomAccess = no;
>>>> LabelMedia = yes;
>>>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>> Alert Command = "sh -c 'smartctl -H -l error %c'"
>>>> }
>>>>
>>>> When i run a job i get this error ;
>>>>
>>>> 22-Dec 15:22 backup-dir JobId 15: shell command: run BeforeJob
>>>> "/usr/lib64/bacula/make_catalog_backup bacula bacula xxx"
>>>> 22-Dec 15:22 backup-dir JobId 15: Start Backup JobId 15,
>>>> Job=BackupCatalog.2009-12-22_15.22.16_42
>>>> 22-Dec 15:22 backup-dir JobId 15: Using Device "Drive-1"
>>>> 22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog
>>>> for Volume "Full-0001" on "Drive-1" (/dev/st0). Manual load may be
>>>> required.
>>>> 22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog
>>>> for Volume "Full-0001" on "Drive-1" (/dev/st0). Manual load may be
>>>> required.
>>>> 22-Dec 15:22 backup-sd JobId 15: 3301 Issuing autochanger "loaded?
>>>> drive 0" command.
>>>> 22-Dec 15:22 backup-sd JobId 15: 3302 Autochanger "loaded? drive 0",
>>>> result: nothing loaded.
>>>> 22-Dec 15:22 backup-sd JobId 15: 3301 Issuing autochanger "loaded?
>>>> drive 0" command.
>>>> 22-Dec 15:22 backup-sd JobId 15: 3302 Autochanger "loaded? drive 0",
>>>> result: nothing loaded.
>>>> 22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog
>>>> for Volume "Full-0001" on "Drive-1" (/dev/st0). Manual load may be
>>>> required.
>>>>
>>>> Here is my device status ;
>>>>
>>>> [root@backup bacula]# mtx -f /dev/sg5 status
>>>> Storage Changer /dev/sg5:2 Drives, 47 Slots ( 3 Import/Export )
>>>> Data Transfer Element 0:Empty
>>>> Data Transfer Element 1:Empty
>>>> Storage Element 1:Full :VolumeTag=000049L4
>>>> Storage Element 2:Full :VolumeTag=000046L4
>>>> Storage Element 3:Full :VolumeTag=000042L4
>>>> Storage Element 4:Full :VolumeTag=000047L4
>>>> Storage Element 5:Full :VolumeTag=000048L4
>>>> Storage Element 6:Full :VolumeTag=000041L4
>>>> Storage Element 7:Full :VolumeTag=000045L4
>>>> Storage Element 8:Full :VolumeTag=000050L4
>>>> Storage Element 9:Full :VolumeTag=000029L4
>>>> Storage Element 10:Full :VolumeTag=000038L4
>>>> Storage Element 11:Full :VolumeTag=000035L4
>>>> Storage Element 12:Full :VolumeTag=000032L4
>>>> Storage Element 13:Full :VolumeTag=000030L4
>>>> Storage Element 14:Full :VolumeTag=000039L4
>>>> Storage Element 15:Full :VolumeTag=000036L4
>>>> Storage Element 16:Full :VolumeTag=000033L4
>>>> Storage Element 17:Full :VolumeTag=000028L4
>>>> Storage Element 18:Full :VolumeTag=000040L4
>>>> Storage Element 19:Full :VolumeTag=000037L4
>>>> Storage Element 20:Full :VolumeTag=000034L4
>>>> Storage Element 21:Full :VolumeTag=000005L4
>>>> Storage Element 22:Full :VolumeTag=000002L4
>>>> Storage Element 23:Full :VolumeTag=000018L4
>>>> Storage Element 24:Full :VolumeTag=000015L4
>>>> Storage Element 25:Full :VolumeTag=000004L4
>>>> Storage Element 26:Full :VolumeTag=000020L4
>>>> Storage Element 27:Full :VolumeTag=000017L4
>>>> Storage Element 28:Full :VolumeTag=000014L4
>>>> Storage Element 29:Full :VolumeTag=000003L4
>>>> Storage Element 30:Full :VolumeTag=000019L4
>>>> Storage Element 31:Full :VolumeTag=000016L4
>>>> Storage Element 32:Full :VolumeTag=000001L4
>>>> Storage Element 33:Full :VolumeTag=000027L4
>>>> Storage Element 34:Full :VolumeTag=000025L4
>>>> Storage Element 35:Full :VolumeTag=000021L4
>>>> Storage Element 36:Full :VolumeTag=000008L4
>>>> Storage Element 37:Full :VolumeTag=000026L4
>>>> Storage Element 38:Full :VolumeTag=000024L4
>>>> Storage Element 39:Full :VolumeTag=000010L4
>>>> Storage Element 40:Full :VolumeTag=000007L4
>>>> Storage Element 41:Full :VolumeTag=000022L4
>>>> Storage Element 42:Full :VolumeTag=000023L4
>>>> Storage Element 43:Full :VolumeTag=000009L4
>>>> Storage Element 44:Full :VolumeTag=000006L4
>>>> Storage Element 45 IMPORT/EXPORT:Full :VolumeTag=000013L4
>>>> Storage Element 46 IMPORT/EXPORT:Full :VolumeTag=000012L4
>>>> Storage Element 47 IMPORT/EXPORT:Full :VolumeTag=000011L4
>>>>
>>>>
>>>> Any idea ?
>>>>
>>> First off do not use st0 if you can use nst0.
>>>
>>> Also you probably will need to modify your mtx-changer.sh script. The
>>> reason is your OS is not waiting for your changer to actually load the
>>> tape. I can see that from the log. The time between start of load and
>>> failure was 0 minutes...
>>>
>>> Look at the comments on this script and consult the list archives for
>>> this problem. I know this problem comes up many times a year for
>>> different changers.
>>
>> What John said. Here is how I customized my mtx-changer script:
>>
>> http://www.freebsddiary.org/tape-library.php
>>
>>
>>
>
> Hi Dan,
>
> Thank you for your reply. I have just tried mtx-changer script manually
> and everthing is working properly. I could load and unload any slots
> without any problem.
What about all the other mtx-changer commands as shown in the above URL?
> Then i add "Maximum Changer Wait = 300 seconds"
> option in bacula-sd.conf file. But the problem is still going on :(
>
> 23-Dec 17:02 backup-sd JobId 20: Invalid slot=0 defined in catalog for
> Volume "Full-0001" on "Drive-1" (/dev/nst0). Manual load may be required.
That's pretty important. see below.
> 23-Dec 17:02 backup-sd JobId 20: 3301 Issuing autochanger "loaded? drive
> 0" command.
> 23-Dec 17:02 backup-sd JobId 20: 3302 Autochanger "loaded? drive 0",
> result: nothing loaded.
> 23-Dec 17:02 backup-sd JobId 20: 3301 Issuing autochanger "loaded? drive
> 0" command.
> 23-Dec 17:02 backup-sd JobId 20: 3302 Autochanger "loaded? drive 0",
> result: nothing loaded.
> 23-Dec 17:02 backup-sd JobId 20: Please mount Volume "Full-0001" or
> label a new one for:
> Job: BackupCatalog.2009-12-23_16.17.53_03
> Storage: "Drive-1" (/dev/nst0)
> Pool: SenelikPool
> Media type: LTO4
>
> How can i fix it?
>
> Regards,
>
> ismail
>
Please remember to CC the list. This allows others to help, not just me.
Please reply at the bottom of the email so we can easily read through
what has already been said.
Have you run 'update slots'?
------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|
