On Fri, Jul 24, 2009 at 11:40 AM, Kris
Monstad<kris.monstad AT absolutestudios DOT com> wrote:
> Hi,
>
> We're using Bacual v2.2.5 on Centos 4.7.
>
> After a power cut which affected only our LTO4 drive (server on UPS)
> none of our tapes are mounting properly. The output is as follows:
>
>
> *mount LTO4
> block.c:995 Read error on fd=5 at file:blk 0:0 on device "LTO4"
> (/dev/st0). ERR=Input/output error.
> block.c:995 Read error on fd=5 at file:blk 0:0 on device "LTO4"
> (/dev/st0). ERR=Input/output error.
> 3902 Cannot mount Volume on Storage Device "LTO4" (/dev/st0) because:
> Requested Volume "" on "LTO4" (/dev/st0) is not a Bacula labeled Volume,
> because: ERR=block.c:995 Read error on fd=5 at file:blk 0:0 on device
> "LTO4" (/dev/st0). ERR=Input/output error.
> 3905 Device "LTO4" (/dev/st0) open but no Bacula volume is mounted.
> If this is not a blank tape, try unmounting and remounting the Volume.
>
>
> Unmounting and re-mounting gives the same message.
>
> Any advice or thoughts on what is happening here are appreciated!
>

Were these volumes labeled? The errors appear that the volumes were
never written to.

John

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users