Bacula-users

Re: [Bacula-users] FileStorage problems after upgrade

2009-07-29 12:07:07
Subject: Re: [Bacula-users] FileStorage problems after upgrade
From: John Drescher <drescherjm AT gmail DOT com>
To: Brian Clarkson <brianc AT lnstar DOT com>
Date: Wed, 29 Jul 2009 12:02:22 -0400
On Wed, Jul 29, 2009 at 12:00 PM, Brian Clarkson<brianc AT lnstar DOT com> 
wrote:
> On Wed, 2009-07-29 at 11:47 -0400, John Drescher wrote:
>> On Wed, Jul 29, 2009 at 11:09 AM, Brian Clarkson<brianc AT lnstar DOT com> 
>> wrote:
>> > I upgraded our bacula install yesterday ( 1.36.3 to 2.4.1 ) and most
>> > things are functioning as expected.
>> >
>> > I'm having an issue with one backup job.  I've searched the mailing list
>> > archives for a solution but I haven't found anything that points me in
>> > the right direction.  I can connect to the remote machine from the
>> > console but I can neither backup nor restore files.
>> >
>> > The console gives me the following information about the error:
>> >
>> > 29-Jul 09:46 colo-dir JobId 11076: Start Backup JobId 11076,
>> > Job=Backup_CBMSI.2009-07-29_09.46.06
>> > 29-Jul 09:46 2cbmsi-sd: Backup_CBMSI.2009-07-29_09.46.06 Fatal error:
>> > Bad Use Device command: use storage=2CBMSIFile media_type=File
>> > pool_name=2CBMSIPool pool_type=Backup append=1 copy=0 stripe=0
>> >
>> > 29-Jul 09:46 colo-dir JobId 11076: Fatal error:
>> >     Storage daemon didn't accept Device "FileStorage" because:
>> >     3913 Bad use command: use storage=2CBMSIFile media_type=File
>> > pool_name=2CBMSIPool pool_type=Backup append=1 copy=0 stripe=0
>> >
>> > 29-Jul 09:46 colo-dir JobId 11076: Error: Bacula colo-dir 2.4.1
>> > (07Jul08): 29-Jul-2009 09:46:22
>> >  Build OS:               i686-pc-linux-gnu gentoo
>> >  JobId:                  11076
>> >  Job:                    Backup_CBMSI.2009-07-29_09.46.06
>> >  Backup Level:           Incremental, since=2009-07-28 01:05:39
>> >  Client:                 "cbmsi-fd"
>> > i686-redhat-linux-gnu,redhat,Enterprise release
>> >  FileSet:                "Full Set CBMSI" 2009-04-03 01:05:50
>> >  Pool:                   "2CBMSIPool" (From Job resource)
>> >  Storage:                "2CBMSIFile" (From Job resource)
>> >  Scheduled time:         29-Jul-2009 09:46:17
>> >  Start time:             29-Jul-2009 09:46:22
>> >  End time:               29-Jul-2009 09:46:22
>> >  Elapsed time:           0 secs
>> >  Priority:               10
>> >  FD Files Written:       0
>> >  SD Files Written:       0
>> >  FD Bytes Written:       0 (0 B)
>> >  SD Bytes Written:       0 (0 B)
>> >  Rate:                   0.0 KB/s
>> >  Software Compression:   None
>> >  VSS:                    no
>> >  Storage Encryption:     no
>> >  Volume name(s):
>> >  Volume Session Id:      187
>> >  Volume Session Time:    1233330677
>> >  Last Volume Bytes:      0 (0 B)
>> >  Non-fatal FD errors:    0
>> >  SD Errors:              0
>> >  FD termination status:
>> >  SD termination status:
>> >  Termination:            *** Backup Error ***
>> >
>> > Nothing about the Client, Storage, Job, or FileSet has changed for this
>> > client.
>> >
>> > The relevant configuration directive are:
>> >
>> > Job {
>> >  Name = "Backup CBMSI"
>> >  Type = Backup
>> >  Client = cbmsi-fd
>> >  FileSet = "Full Set CBMSI"
>> >  Schedule = "WeeklyCycle"
>> >  Storage = 2CBMSIFile
>> >  Messages = Standard
>> >  Pool = 2CBMSIPool
>> >  Write Bootstrap = "/usr/local/bacula/var/bacula/working/cbmsi.bsr"
>> > }
>> >
>> > Job {
>> >  Name = "Restore CBMSI"
>> >  Type = Restore
>> >  Client = cbmsi-fd
>> >  FileSet="Full Set CBMSI"
>> >  Storage = 2CBMSIFile
>> >  Pool = 2CBMSIPool
>> >  Messages = Standard
>> >  Where = /tmp/bacula-restores
>> > }
>> >
>> > Client {
>> >   Name = cbmsi-fd
>> >   Address = host1
>> >   FDPort = 9102
>> >   Catalog = MyCatalog
>> >   Password = ******
>> >   File Retention = 21 days
>> >   Job Retention = 21 days
>> >   AutoPrune = yes
>> > }
>> >
>> > Storage {
>> >    Name = 2CBMSIFile
>> >    Address = host2
>> >    SDPort = 9103
>> >    Password = ******
>> >    Device = FileStorage
>> >    Media Type = File
>> > }
>> >
>> >
>> > I'm not sure how to continue debugging the problem.  Any help is
>> > appreciated.
>> >
>> >
>>
>> How about the bacula-sd.conf file from host2? That appears to be where
>> the problem exists.
>
>
> I didn't think to include the file from host2 since it hasn't changed at
> all.  That installation is still at v1.36.3.  It's in the upgrade queue.
>
That is probably the problem then. I mean the director is rejecting
the storage on this server.

John

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with 
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users