Hi Jc. Just to be clear. Have you a tape library or just a single drive ?
If you have just a drive ( like your configuration /dev/nst0 let suppose )
I would remove the drive index in your configuration
Device {
Name = VersBande #
>>>>>>>>>>>>>>>>>>>>>>> Drive Index = 0
Media Type = LTO4
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
>>>>>>>>>>>>>>>>>>>>>> AutoChanger = yes; ?
LabelMedia = yes;
}
After reviewing carefully your configuration. I would make some basic tests
Did a label / relabel work with the device ?
If you have a tape library I think you have to configure it with the mtx
changer before use.
Also bacula tests are usefull to ensure you have a working build & config.
jc.duss59 AT laposte DOT net wrote:
> Dear All bacula users,
>
> Here is some more information about my problem. After reading this :
> http://www.mail-archive.com/bacula-users AT lists.sourceforge DOT
> net/msg10009.html
> I try compiling it with the -O0 the source.. and I still get the same error.
>
> Here are more information from btraceback :
>
> [Thread debugging using libthread_db enabled]
> [New Thread 0x7fb61dec06f0 (LWP 24300)]
> [New Thread 0x41399950 (LWP 24369)]
> [New Thread 0x41b9a950 (LWP 24303)]
> 0x00007fb61ce4dce2 in select () from /lib/libc.so.6
> $1 = "LTO4", '\0' <repeats 25 times>
> $2 = 0x1060078 "bacula-sd"
> $3 = 0x10600b8 "/usr/sbin/bacula-sd"
> $4 = 0x0
> $5 = 0x472557 "2.4.4 (28 December 2008)"
> $6 = 0x472570 "x86_64-unknown-linux-gnu"
> $7 = 0x472589 "debian"
> $8 = 0x472590 "5.0.1"
> #0 0x00007fb61ce4dce2 in select () from /lib/libc.so.6
> #1 0x000000000043e7b0 in bnet_thread_server (addrs=0x1061d88,
> max_clients=41, client_wq=0x682640,
> handle_client_request=0x41d5c8 <handle_connection_request(void*)>) at
> bnet_server.c:161
> #2 0x00000000004051c3 in main (argc=0, argv=0x7fff25ecd748) at stored.c:265
>
> Thread 3 (Thread 0x41b9a950 (LWP 24303)):
> #0 0x00007fb61d888fad in pthread_cond_timedwait@@GLIBC_2.3.2 () from
> /lib/libpthread.so.0
> #1 0x000000000045b5f6 in watchdog_thread (arg=0x0) at watchdog.c:307
> #2 0x00007fb61d884fc7 in start_thread () from /lib/libpthread.so.0
> #3 0x00007fb61ce545ad in clone () from /lib/libc.so.6
> #4 0x0000000000000000 in ?? ()
>
> Thread 2 (Thread 0x41399950 (LWP 24369)):
> #0 0x00007fb61d88c5ef in waitpid () from /lib/libpthread.so.0
> #1 0x0000000000459021 in signal_handler (sig=11) at signal.c:167
> #2 <signal handler called>
> #3 0x00000000004302ca in is_vol_in_autochanger (rctx=@0x41398c50,
> vol=0x1068758) at reserve.c:890
> #4 0x000000000043398e in find_suitable_device_for_job (jcr=0x1066178,
> rctx=@0x41398c50) at reserve.c:987
> #5 0x0000000000434681 in use_storage_cmd (jcr=0x1066178) at reserve.c:815
> #6 0x0000000000434b96 in use_cmd (jcr=0x1066178) at reserve.c:75
> #7 0x000000000041db94 in handle_connection_request (arg=0x1066848) at
> dircmd.c:232
> #8 0x000000000045bfa4 in workq_server (arg=0x682640) at workq.c:357
> #9 0x00007fb61d884fc7 in start_thread () from /lib/libpthread.so.0
> #10 0x00007fb61ce545ad in clone () from /lib/libc.so.6
> #11 0x0000000000000000 in ?? ()
>
> Thread 1 (Thread 0x7fb61dec06f0 (LWP 24300)):
> #0 0x00007fb61ce4dce2 in select () from /lib/libc.so.6
> #1 0x000000000043e7b0 in bnet_thread_server (addrs=0x1061d88,
> max_clients=41, client_wq=0x682640,
> handle_client_request=0x41d5c8 <handle_connection_request(void*)>) at
> bnet_server.c:161
> #2 0x00000000004051c3 in main (argc=0, argv=0x7fff25ecd748) at stored.c:265
> #0 0x00007fb61ce4dce2 in select () from /lib/libc.so.6
> #0 0x00007fb61ce4dce2 in select () from /lib/libc.so.6
> No symbol table info available.
> #1 0x000000000043e7b0 in bnet_thread_server (addrs=0x1061d88,
> max_clients=41, client_wq=0x682640,
> handle_client_request=0x41d5c8 <handle_connection_request(void*)>) at
> bnet_server.c:161
> 161 if ((stat = select(maxfd + 1, &sockset, NULL, NULL, NULL)) < 0) {
> Current language: auto; currently c++
> maxfd = 5
> sockset = {fds_bits = {32, 0 <repeats 15 times>}}
> newsockfd = 6
> stat = 0
> clilen = 16
> cli_addr = {sa_family = 2, sa_data =
> "¼×\n\001\033(\000\000\000\000\000\000\000"}
> tlog = 0
> turnon = 1
> p = (IPADDR *) 0x0
> fd_ptr = (s_sockfd *) 0x0
> buf = "10.1.27.40\000%ÿ\177", '\0' <repeats 26 times>,
> "ÊáË\035¶\177\000\000\005\000\000\000ÿ\177\000\000\000\000\000\000\000\000\000\000
>
> ×ì%ÿ\177\000\000\000\000\000\000\000\000\000\000\220ý\207\035¶\177\000\000HÚì%ÿ\177\000\000\200Õì%ÿ\177\000\000\022@Ì\035¶\177\000\000
> \206\001\000\000\000\000\000ÿÿÿÿÿÿÿÿ"
> sockfds = {<SMARTALLOC> = {<No data fields>}, head = 0x7fff25ecc8f0, tail =
> 0x7fff25ecc8f0, loffset = 0, num_items = 1}
> allbuf =
> "p/\006\001\000\000\000\000ÐÉì%ÿ\177\000\0000Åì%ÿ\177\000\000\230\006ì\035¶\177\000\000à`\r\035¶\177\000\000É1æ\034\002\000\000\000_nss_files_getho0Éì%ÿ\177\000\000\000\004\000\000\000\000\000\000\001\000\000\000ÿ\177\000\000`]\r\035¶\177\000\000\005\000\000\000\000\000\000\000à'\006\001\000\000\000\000\001\000\000\000\001\000\000\000
>
> \000\000\000\000\000\000\000q\000\000\000\000\000\000\000x#\006\001\000\000\000\000PÊì%ÿ\177\000\000\000;@\000\000\000\000\000
> ×ì%ÿ\177", '\0' <repeats 18 times>,
> "NÃC\000\000\000\000\000à9\r\035¶\177\000\000\2009h\000\000\000\000\000"...
> #2 0x00000000004051c3 in main (argc=0, argv=0x7fff25ecd748) at stored.c:265
> 265 &dird_workq, handle_connection_request);
> ch = -1
> no_signals = false
> test_config = false
> thid = 1094293840
> uid = 0x0
> gid = 0x0
> #0 0x0000000000000000 in ?? ()
> No symbol table info available.
> #0 0x0000000000000000 in ?? ()
> No symbol table info available.
> #0 0x0000000000000000 in ?? ()
> No symbol table info available.
> #0 0x0000000000000000 in ?? ()
> No symbol table info available.
> #0 0x0000000000000000 in ?? ()
> No symbol table info available.
> Can someone help me please?
> Best Regards to all!
>
>
>
> > Message du 28/05/09 12:26
>> De : "jc.duss59 AT laposte DOT net"
>> A : bacula-users AT lists.sourceforge DOT net
>> Copie à :
>> Objet : [Bacula-users] Storage daemon didn't accept Device
>> "VersBande"command.
>>
>>
> Dear all bacula users,
>
> I get a problem on a x86_64 debian lenny with bacula SD (Version: 2.4.4 (28
> December 2008)) installed by apt-get and an IBM LTO4 Ultrium4-H storage
> device. I can't make backup trough my LTO but backup to a file works fine.
>
> When I try to launch a backup on it I got the following output :
> 28-May 12:42 alibaba JobId 61: BeforeJob: run command
> "/etc/bacula/scripts/make_catalog_backup bacula bacula bacula"
> 28-May 12:42 alibaba JobId 61: Start Backup JobId 61,
> Job=Job_Backup_vers_LTO.2009-05-28_12.42.16.11
> 28-May 12:42 alibaba JobId 61: Fatal error:
> Storage daemon didn't accept Device "VersBande" command.
> 28-May 12:42 alibaba JobId 61: Error: Bacula alibaba 2.4.4 (28Dec08):
> 28-May-2009 12:42:18
> Build OS: x86_64-pc-linux-gnu debian lenny/sid
> JobId: 61
> Job: Job_Backup_vers_LTO.2009-05-28_12.42.16.11
> Backup Level: Full
> Client: "alibaba" 2.4.4 (28Dec08)
> x86_64-pc-linux-gnu,debian,lenny/sid
> FileSet: "Backup Files" 2009-05-28 12:39:31
> Pool: "Default" (From Job resource)
> Storage: "SurBande" (From Job resource)
> Scheduled time: 28-May-2009 12:42:15
> Start time: 28-May-2009 12:42:18
> End time: 28-May-2009 12:42:18
> Elapsed time: 0 secs
> Priority: 11
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0 (0 B)
> SD Bytes Written: 0 (0 B)
> Rate: 0.0 KB/s
> Software Compression: None
> VSS: no
> Storage Encryption: no
> Volume name(s):
> Volume Session Id: 1
> Volume Session Time: 1243507271
> Last Volume Bytes: 64,512 (64.51 KB)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status:
> SD termination status:
> Termination: *** Backup Error ***
>
>
> Here is the debug output of bacula-sd :
> LTO4: cram-md5.c:73-0 send: auth cram-md5 <1242617274.12435
> LTO4: cram-md5.c:152-0 sending resp to challenge: 5+t7i5/BmiFUZkcloFNFyD
> LTO4: dircmd.c:210-0 Message channel init completed.
> LTO4: reserve.c:697-0 jid=61
> LTO4: reserve.c:726-0 jid=61 LTO4: reserve.c:743-0 jid=61 Storage=SurBande
> media_type=LTO4 pool=Default pool_
> LTO4: reserve.c:745-0 jid=61 Device=VersBande
> LTO4: reserve.c:921-0 jid=61 PrefMnt=1 exact=1 suitable=0 chgronly=0
> LTO4: reserve.c:933-0 lock volumes
> LTO4: reserve.c:944-0 jid=61 duplicate vol list
> LTO4: reserve.c:963-0 jid=61 look for vol in vol list
> LTO4: reserve.c:975-0 jid=61 vol=Test OK for this job
> LTO4: reserve.c:986-0 jid=61 vol=Test is in changer
> Kaboom! bacula-sd, LTO4 got signal 11 - Segmentation violation. Attempting
> trace
> Kaboom! exepath=/usr/sbin/
> Calling: /usr/sbin/btraceback /usr/sbin/bacula-sd 3319
> Traceback complete, attempting cleanup ...
>
>
> Here is my bacula-sd.conf file :
> Storage { # definition of myself
> Name = LTO4
> SDPort = 9103 # Director's port
> WorkingDirectory = "/var/lib/bacula"
> Pid Directory = "/var/run/bacula"
> Maximum Concurrent Jobs = 20
> SDAddress = alibaba
> }
> Director {
> Name = alibaba
> Password = ""
> }
> Device {
> Name = VersRepBackup
> Media Type = File
> Archive Device = /home/backup
> LabelMedia = yes
> Random Access = yes
> AutomaticMount = yes
> RemovableMedia = no
> AlwaysOpen = no
> }
> Device {
> Name = VersBande #
> Drive Index = 0
> Media Type = LTO4
> Archive Device = /dev/nst0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes;
> LabelMedia = yes;
> }
>
> Messages {
> Name = Standard
> director = alibaba = all
> }
>
>
> Here is my bacula-dir.conf :
> Director { # define myself
> Name = alibaba
> DIRport = 9101 # where we listen for UA connections
> QueryFile = "/etc/bacula/scripts/query.sql"
> WorkingDirectory = "/var/lib/bacula"
> PidDirectory = "/var/run/bacula"
> Maximum Concurrent Jobs = 1
> Password = ""
> # Console password
> Messages = Daemon
> DirAddress = alibaba
> }
> JobDefs {
> Name = "DefaultJob"
> Type = Backup
> Level = Incremental
> Client = alibaba
> FileSet = "Full Set"
> Schedule = "WeeklyCycle"
> Storage = File
> Messages = Standard
> Pool = Default
> Priority = 10
> }
> JobDefs {
> Name = "VersFicWeekly"
> Type = Backup
> Level = Full
> Client = alibaba
> FileSet = "Backup Files"
> Schedule = "WeeklyCycle"
> Storage = File
> Messages = Standard
> Pool = Default
> Priority = 10
> }
> JobDefs {
> Name = "VersBandeWeekly"
> Type = Backup
> Level = Full
> Client = alibaba
> FileSet = "Backup Files"
> Schedule = "WeeklyCycle"
> Storage = "SurBande"
> Messages = Standard
> Pool = Default
> Priority = 10
> }
> Job {
> Name = "Client1"
> JobDefs = "DefaultJob"
> Write Bootstrap = "/var/lib/bacula/Client1.bsr"
> }
> Job {
> Name = "BackupCatalog"
> JobDefs = "DefaultJob"
> Level = Full
> FileSet="Catalog"
> Schedule = "WeeklyCycleAfterBackup"
> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup bacula bacula bacula"
> RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
> Write Bootstrap = "/var/lib/bacula/BackupCatalog.bsr"
> Priority = 11 # run after main backup
> }
> Job {
> Name = "RestoreFiles"
> Type = Restore
> Client= alibaba
> FileSet="Full Set"
> Storage = File
> Pool = Default
> Messages = Standard
> Where = /home/restore
> }
> Job {
> Name = "Job Backup vers Fic"
> JobDefs = "VersFicWeekly"
> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup bacula bacula bacula"
> RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
> Write Bootstrap = "/var/lib/bacula/BackupCatalog.bsr"
> Priority = 11 # run after main backup
> File Set = "Backup Files"
> }
> Job {
> Name = "Job Backup vers LTO"
> JobDefs = "VersBandeWeekly"
> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup bacula bacula bacula"
> RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
> Write Bootstrap = "/var/lib/bacula/BackupCatalog.bsr"
> Priority = 11 # run after main backup
> File Set = "Backup Files"
> }
> FileSet {
> Name = "Full Set"
> Include {
> Options {
> signature = MD5
> }
> File = /build/buildd/bacula-2.4.4/debian/tmp-build-sqlite
> }
> Exclude {
> File = /proc
> File = /tmp
> File = /.journal
> File = /.fsck
> }
> }
> FileSet {
> Name = "Backup Files"
> Include {
> Options {
> signature = MD5
> }
> File = /home/myfolder
> }
> }
> Schedule {
> Name = "WeeklyCycle"
> Run = Full 1st sun at 23:05
> Run = Differential 2nd-5th sun at 23:05
> Run = Incremental mon-sat at 23:05
> }
> Schedule {
> Name = "WeeklyCycleAfterBackup"
> Run = Full sun-sat at 23:10
> }
> FileSet {
> Name = "Catalog"
> Include {
> Options {
> signature = MD5
> }
> File = /var/lib/bacula/bacula.sql
> }
> }
> Client {
> Name = alibaba
> Address = alibaba
> FDPort = 9102
> Catalog = MyCatalog
> Password = ""
> # password for FileDaemon
> File Retention = 30 days # 30 days
> Job Retention = 6 months # six months
> AutoPrune = yes # Prune expired Jobs/Files
> }
> Storage {
> Name = File
> Address = alibaba # N.B. Use a fully qualified name here
> SDPort = 9103
>
> Password = ""
> Device = VersRepBackup
> Media Type = File
> }
> Storage {
> Name = SurBande
> Address = alibaba
> SDPort = 9103
> Password = ""
> Device = VersBande
> Media Type = LTO4
> }
> Catalog {
> Name = MyCatalog
> dbname = "bacula"; dbuser = "bacula"; dbpassword = "bacula"
> }
> Messages {
> Name = Standard
> mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s
> \"Bacula: %t %e of %c %l\" %r"
> operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\)
> \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
> mail = root@localhost = all, !skipped
> operator = root@localhost = mount
> console = all, !skipped, !saved
> append = "/var/lib/bacula/log" = all, !skipped
> }
> Messages {
> Name = Daemon
> mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s
> \"Bacula daemon message\" %r"
> mail = root@localhost = all, !skipped
> console = all, !skipped, !saved
> append = "/var/lib/bacula/log" = all, !skipped
> }
>
> Pool {
> Name = Default
> Pool Type = Backup
> Recycle = yes # Bacula can automatically recycle Volumes
> AutoPrune = yes # Prune expired volumes
> Volume Retention = 365 days # one year
> }
> Pool {
> Name = Scratch
> Pool Type = Backup
> }
> Console {
> Name = alibaba
>
> Password = ""
> CommandACL = status, .status
> }
> Does someone knows about this problem?
> Thanks for your help!
>
--
Bruno Friedmann
Ioda-Net Sàrl
2830 Vellerat - Switzerland
www.ioda-net.ch
------------------------------------------------------------------------------
OpenSolaris 2009.06 is a cutting edge operating system for enterprises
looking to deploy the next generation of Solaris that includes the latest
innovations from Sun and the OpenSource community. Download a copy and
enjoy capabilities such as Networking, Storage and Virtualization.
Go to: http://p.sf.net/sfu/opensolaris-get
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
