Hello
i m using , an mixed configuration changer , with in it :
my autochanger have 60 slots (around 30 lto3 tapes , and 20 lto2 )
and theses drives :
/dev/st0 LTO3
/dev/st1 LTO2
/dev/st2 LTO3
Each one , is declared in the .conf files .
Each one work fine , ith the btape utility :-)
But under bacula , somtimes , i ve a serious problem like this one :
- bacula trying to mount an LTO3 tape , in the LTO2 drive ...
and in this case the result is .. catastrophic !!
Simple question ? , how can i fix it ?
Regards . :-)
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|