Re: [Bacula-users] closing tape upon completion.
2009-01-13 11:11:10
Timo Neuvonen wrote:
>> Is it possible to have bacula close a tape once last job is run
>> (backupcatalog in my case)?
>>
>> currently it leaves tapes on a "APPEND" status, then bacula wants to
>> reuse the tape instead of taking a new one in the library.
>>
>
> Easiest way (before knowing what you mean with "last job") might be defining
> for how long time Bacula may use the same tape, starting from first write
> (after recycling). For example, if your jobs (from "first" to "last") take a
> maximum of 3 hours, you could set max volume use duration (check the correct
> syntax from manual) to, say, 6 to 12 hours. While this time has expired
> (next day?), Bacula will take another tape from the library.
this is what I use, but on the next bacula run, bacula kept wanting to
load the tape prior to take into consideration that the tape was past
the expiration time of usage.
> --
> TiN
>
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> SourcForge Community
> SourceForge wants to tell your story.
> http://p.sf.net/sfu/sf-spreadtheword
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
Re: [Bacula-users] closing tape upon completion.,
Pascal Clermont <=
|
|
|