Hey all,
I have a tape changer, and backup took more than the normal amount of
tapes this time. It was requesting a tape that wasn't in the changer,
but there was a Scratch pool tape in the changer. I guess I should have
a longer retention time, so that it thinks there aren't any available
from the usual pool, and takes the Scratch tape automatically. So, I
thought I would just change the scratch pool tape into the weekly pool,
and then it would use that instead of the other tape it wanted. That is
what I did:
Current Pool is: Scratch
Enter new Pool name: Weekly
New Pool is: Weekly
*
*update slots
Automatically selected Storage: Exabyte
Connecting to Storage daemon Exabyte at billie:9103 ...
3306 Issuing autochanger "slots" command.
Device "Exabyte" has 10 slots.
Connecting to Storage daemon Exabyte at billie:9103 ...
3306 Issuing autochanger "list" command.
Catalog record for Volume "G0000003" updated to reference slot 1.
Catalog record for Volume "G0000002" updated to reference slot 2.
Catalog record for Volume "G0000004" updated to reference slot 3.
Catalog record for Volume "G0000005" updated to reference slot 4.
Catalog record for Volume "G0000006" updated to reference slot 5.
Catalog record for Volume "G0000007" updated to reference slot 6.
Catalog record for Volume "G0000001" updated to reference slot 7.
Catalog record for Volume "G0000008" updated to reference slot 9.
Catalog record for Volume "CLNA0001" updated to reference slot 10.
Catalog record for Volume "F0000009" updated to reference slot 8.
*
*mount
Automatically selected Storage: Exabyte
3001 OK mount. Device="Drive-1" (/dev/st0)
*
And, it seemed maybe it had worked:
*
11-May 20:48 billie-sd JobId 546: 3307 Issuing autochanger "unload slot
8, drive 0" command.
*
but then:
You have messages.
*messages
11-May 20:49 billie-fd JobId 546: Fatal error: backup.c:892 Network send
error to SD. ERR=Broken pipe
11-May 20:49 billie-fd JobId 546: Error: bsock.c:306 Write error sending
65536 bytes to Storage daemon:billie:9103: ERR=Broken pipe
11-May 20:49 billie-dir JobId 0: Warning: bsock.c:123 Could not connect
to Storage daemon on billie:9103. ERR=Connection refused
Retrying ...
it did this a few times, and then:
11-May 20:49 billie-fd JobId 546: Fatal error: backup.c:892 Network send
error to SD. ERR=Broken pipe
11-May 20:49 billie-fd JobId 546: Error: bsock.c:306 Write error sending
65536 bytes to Storage daemon:billie:9103: ERR=Broken pipe
At this point, the storage daemon was no longer working.
So, should I have not used the mount command? Would it have sorted
things out, if I had just left it alone after moving the tape to the
Weekly pool, or can I just not move tapes like this?
thanks for any help,
maria
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
