Re: Tape Autoloader
2008-10-20 05:41:14
Prashant Ramhit wrote:
Hi All,
I have been using a LT04 Tape for backup. And now I received a new LT04
Quantum Superloader.
I am trying to get it working but it is not.
My config is as follows,
amanda.conf
runtapes 2
tpchanger "chg-zd-mtx"
changerfile "/var/lib/amanda/changer.conf"
changerdev "/dev/sg0"
tapetype LTO-4
tapedev "/dev/nst0"
labelstr "^CLN14[1-2]L2*$"
amrecover_changer "chg-zd-mtx"
changer.conf
eject > 1 # Tapedrives need an eject command
sleep 10 # Seconds to wait until the tape gets ready
cleanmax 10
havebarcode 1
havereader=1
offline_before_unload=1
offlinestatus=1
OFFLINE_BEFORE_UNLOAD=1
root@backupserver:/etc/amanda/fullback# mtx -f /dev/sg2 status
Storage Changer /dev/sg2:1 Drives, 16 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
Storage Element 1:Full :VolumeTag=CLN141L2
Storage Element 2:Full :VolumeTag=CLN142L2
Storage Element 3:Empty
Storage Element 4:Empty
Storage Element 5:Empty
Storage Element 6:Empty
Storage Element 7:Empty
Storage Element 8:Empty
Storage Element 9:Empty
Storage Element 10:Empty
Storage Element 11:Empty
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Empty
Anyone has an idea, what is wrong.
Thanks
Prashant
Prashant,
What exactly does not work?
And you do know you're probably working with only cleaning tapes?
Usually the cleaning tapes get a label 'CLN'. Please make sure there are
'normal' tapes in the drive..
Angelo.
|
|
|