Hi All,

I am trying to get it working but it is not.

My config is as follows,

amanda.conf

runtapes 2
tpchanger "chg-zd-mtx"
changerfile "/var/lib/amanda/changer.conf"
changerdev "/dev/sg0"
tapetype LTO-4
tapedev "/dev/nst0"
labelstr "^CLN14[1-2]L2*$"
amrecover_changer "chg-zd-mtx"


changer.conf

eject > 1 # Tapedrives need an eject command
sleep 10 # Seconds to wait until the tape gets ready
cleanmax 10
havebarcode 1
havereader=1
offline_before_unload=1
offlinestatus=1
OFFLINE_BEFORE_UNLOAD=1


root@backupserver:/etc/amanda/fullback# mtx -f /dev/sg2 status
Storage Changer /dev/sg2:1 Drives, 16 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
    Storage Element 1:Full :VolumeTag=CLN141L2
    Storage Element 2:Full :VolumeTag=CLN142L2
    Storage Element 3:Empty
    Storage Element 4:Empty
    Storage Element 5:Empty
    Storage Element 6:Empty
    Storage Element 7:Empty
    Storage Element 8:Empty
    Storage Element 9:Empty
    Storage Element 10:Empty
    Storage Element 11:Empty
    Storage Element 12:Empty
    Storage Element 13:Empty
    Storage Element 14:Empty
    Storage Element 15:Empty
    Storage Element 16:Empty


Anyone has an idea, what is wrong.

Thanks
Prashant