stan schrieb:
amidxtaped: No tapedev specified
Sure Maybe you should configure a tapedev?!
> I set up 3 configs, one for the RAIT, and one each for disk_only,
> and tape_only. But when I try to use the alternate confis with
> amrecover, I get a "no indexes" message, so I have somthing wrong there.
You mean, you have backuped with one config and and try to restore with an
other configuration and then it tells you "no indexes"? This results in that
your configurations have different index directories. You can 1) set this to
the same directory (to the one of the config you have used for backup) or 2)
copy the indexes to the second directory.
> And the one for tape_only looks like this:
> ...
> tapedev "/dev/nst0"
Seems OK, if nst0 is the drive you use.
> The config file for disk_only looks like this:
No tapedev here? Set it to
tapedev "file:/...../slots"
I'm invoking amrecover on the client like this:
/opt/ama*/sbin/amrecover -s amanda -t amanda (as root).
You have to specify the setname
amrecover [[-C] <config>] [-s <index-server>] [-t <tape-server>]
I don't tell amrecover the device. My server get this information out it's
configuration files accociated with the config-option.
First question, what tape device should I specify to amrecover? Second
question, what changes do I need to make to the tape_only, and disk_only
configs to allow them to work corectly for restores?
Other question first: Does all three configs work fine, for backup?
Regards and happy SysAdmin-Day.
Marc
--
Marc Muehlfeld (Leitung Systemadministration)
Zentrum fuer Humangenetik und Laboratoriumsmedizin Dr. Klein und Dr. Rost
Lochhamer Str. 29 - D-82152 Martinsried
Telefon: +49(0)89/895578-0 - Fax: +49(0)89/895578-78
http://www.medizinische-genetik.de
| 