Re: barcode scanners (or, chg-zd-mtx problem)
2005-07-08 13:32:35
On Fri, 2005-07-08 at 10:34 -0600, Cam wrote:
> havereader 1
> firstslot 1
> lastslot 17
> cleanslot -1
> offline_before_unload 0
>
> but when i run the "/usr/lib/amanda/chg-zd-mtx -info'" it reports "4 30 1 "
Where are you running it from? It'll read the config in the local
directory (IIRC), so you should run it from your config directory.
> These values are good (the 30 is what i want, but i changed it to 17
> for testing purposes), but they are clearly not what is in my
> changer.conf.
I've noticed that on our Exabyte unit, it *always* reports the number of
slots that actually have tapes in them, as opposed to the number of
slots I've specified to use, or the total number of slots.
> I'm not sure if it's guessing the information on it's
> own or pulling it from some other file... i read through some of the
> /tmp/amanda/chg-zd-mtx stuff, but unfortunately they do not tell me
> what config file it's reading from. Any help would be greatly
> appreciated.
What do you have in relation to the changer in your amanda.conf?
--
Graeme Humphries (graeme.humphries AT vcom DOT com)
Linux Administrator
VCom Inc.
(306) 955-7075 ext 485
My views and comments do not necessarily reflect the views of my
employer.
|
|
|