Re: driver: WARNING: got empty schedule from planner

below is the error message from the amdump.X.  My OS is solaris 8.   thanks
for your help.

m5413.drsite.univision.com $ cat amdump.1
amdump: start at Tue Jul  5 13:21:10 EDT 2005
amdump: datestamp 20050705
planner: pid 5866 executable /usr/local/libexec/planner version 2.4.4p4
planner: build: VERSION="Amanda-2.4.4p4"
planner:        BUILT_DATE="Wed Jun 15 14:10:32 EDT 2005"
planner:        BUILT_MACH="SunOS m5413.drsite.univision.com 5.8
Generic_117350-14 sun4u sparc SUNW,Sun-Fire-V240"
planner:        CC="gcc"
planner:        CONFIGURE_COMMAND="'./configure' '--with-user=amanda'
'--with-group=uol'"
planner: paths: bindir="/usr/local/bin" sbindir="/usr/local/sbin"
planner:        libexecdir="/usr/local/libexec" mandir="/usr/local/man"
planner:        AMANDA_TMPDIR="/tmp/amanda" AMANDA_DBGDIR="/tmp/amanda"
planner:        CONFIG_DIR="/usr/local/etc/amanda" DEV_PREFIX="/dev/dsk/"
planner:        RDEV_PREFIX="/dev/rdsk/" DUMP="/usr/sbin/ufsdump"
planner:        RESTORE="/usr/sbin/ufsrestore" VDUMP=UNDEF VRESTORE=UNDEF
driver: pid 5865 executable /usr/local/libexec/driver version 2.4.4p4
driver: tape size 103809024
driver: send-cmd time 0.003 to taper: START-TAPER 20050705
planner:        XFSDUMP=UNDEF XFSRESTORE=UNDEF VXDUMP=UNDEF VXRESTORE=UNDEF
planner:        SAMBA_CLIENT=UNDEF GNUTAR=UNDEF
planner:        COMPRESS_PATH="/usr/bin/gzip"
planner:        UNCOMPRESS_PATH="/usr/bin/gzip" LPRCMD=UNDEF
planner:        MAILER="/usr/bin/mailx"
planner:        listed_incr_dir="/usr/local/var/amanda/gnutar-lists"
planner: defs:  DEFAULT_SERVER="m5413.drsite.univision.com"
planner:        DEFAULT_CONFIG="DailySet1"
planner:        DEFAULT_TAPE_SERVER="m5413.drsite.univision.com"
planner:        DEFAULT_TAPE_DEVICE="/dev/rmt/0bn" HAVE_MMAP HAVE_SYSVSHM
planner:        LOCKING=POSIX_FCNTL SETPGRP_VOID DEBUG_CODE
planner:        AMANDA_DEBUG_DAYS=4 BSD_SECURITY USE_AMANDAHOSTS
planner:        CLIENT_LOGIN="amanda" FORCE_USERID HAVE_GZIP
planner: taper       COMPRESS_SUFFIX=".gz" COMPRESS_FAST_OPT="--fast"
: pid planner: 5867       COMPRESS_BEST_OPT="--best" UNCOMPRESS_OPT="-dc"
 executable taper version 2.4.4p4
planner: time 0.023: dgram_bind: socket bound to 0.0.0.0.624
READING CONF FILES...
taper: page size is 8192
taper: buffer size is 32768
taper: buffer[00] at fef00000
taper: buffer[01] at fef08000
taper: buffer[02plannerdriver: started ] at : time dumper0fef100000.025 pid
: startup took 5868taper0.025
: buffer[ secs
03driver: started
SETTING UP FOR ESTIMATES...
] at dumper1plannerfef18000 pid : time
58690.041taper
: setting up estimates for : buffer[driver: started
m5413.drsite.univision.com04dumper2:] at  pid /dumpsfef200005870
dumperdumper

m5413.drsite.univision.com: dgram_bind: socket bound to : dgram_bind: socket
bound to taperdumper:0.0.0.00.0.0.0: buffer[: dgram_bind: socket bound to
/dumps.626.628050.0.0.0 overdue

] at .62712970driver: started dumperdumperfef28000
 daydumper3: pid : pid
dumpers pid 58685870taper: pid  for level 0
5871 executable  executable : buffer[5869setup_estimate:
dumper0dumper206 executable m5413.drsite.univision.com version  version ] at
dumper1:2.4.4p42.4.4p4fef30000 version /dumps, using port , using port
2.4.4p4: command 626
628
taper, using port 0dumper: buffer[627
, options:: dgram_bind: socket bound to 07
    last_level 0.0.0.0] at -1fef38000.629 next_level0

-taper12970: buffer[ level_days 080
] at     getting estimates fef400000 (0
) taper-1 (dumper: buffer[-: pid 091) -5871] at 1 executable fef48000
(-1dumper3
)
 version taper2.4.4p4: buffer[planner, using port 10: time 629
] at 0.065fef50000: setting up estimates took
0.023taper secs
: buffer[
GETTING ESTIMATES...
11] at fef58000
taper: buffer[12] at fef60000
taper: buffer[13] at fef68000
taper: buffer[14] at fef70000
taper: buffer[15] at fef78000
taper: buffer[16] at fef80000
taper: buffer[17] at fef88000
taper: buffer[18] at fef90000
taper: buffer[19] at fef98000
taper: buffer structures at fefa0000 for 240 bytes
changer: opening pipe to: /usr/local/libexec/chg-zd-mtx -info
changer: got exit: 2 str: <none> cannot determine first slot
taper: could not get changer info: cannot determine first slot
planner: time 2.124: got result for host m5413.drsite.univision.com disk
/dumps: 0 -> -1K, -1 -> -1K, -1 -> -1K
planner: time 2.124: getting estimates took 2.053 secs
FAILED QUEUE:
  0: m5413.drsite.univision.com /dumps
DONE QUEUE: empty

ANALYZING ESTIMATES...
planner: FAILED m5413.drsite.univision.com /dumps 20050705 0 [disk /dumps,
all estimate failed]
INITIAL SCHEDULE (size 64):

DELAYING DUMPS IF NEEDED, total_size 64, tape length 103809024 mark 0
  delay: Total size now 64.

PROMOTING DUMPS IF NEEDED, total_lev0 0, balanced_size 0...
planner: time 2.139: analysis took 0.015 secs

GENERATING SCHEDULE:
--------
ENDFLUSH
--------
driver: adding holding disk 0 dir /cust/home/amanda/dumps size 2048000
reserving 2048000 out of 2048000 for degraded-mode dumps
driver: flush size 0
driver: start time 2.141 inparallel 4 bandwidth 2000 diskspace 2048000 dir
OBSOLETE datestamp 20050705 driver: drain-ends tapeq FIRST big-dumpers sssS
driver: result time 2.142 from taper: TAPE-ERROR [new tape not found in
rack]
dump of driver schedule before start degraded mode:
--------
--------
dump of driver schedule after start degraded mode:
--------
--------
driver: state time 2.142 free kps: 2000 space: 2048000 taper: DOWN
idle-dumpers: 4 qlen tapeq: 0 runq: 0 roomq: 0 wakeup: 86400 driver-idle:
not-idle
driver: interface-state time 2.142 if : free 600 if LE0: free 400 if LOCAL:
free 1000
driver: hdisk-state time 2.142 hdisk 0: free 2048000 dumpers 0
driver: QUITTING time 2.142 telling children to quit
driver: send-cmd time 2.142 to dumper0: QUIT
driver: send-cmd time 2.142 to dumper1: QUIT
driver: send-cmd time 2.153 to dumper2: QUIT
driver: send-cmd time 2.153 to dumper3: QUIT
driver: send-cmd time 2.153 to taper: QUIT
taper: DONE [idle wait: 1.890 secs]
driver: FINISHED time 2.157
amdump: end at Tue Jul  5 13:21:12 EDT 2005
m5413.drsite.univision.com $
# khalid/
----- Original Message ----- 
From: "Paul Bijnens" <paul.bijnens AT xplanation DOT com>
To: "khalid maqsudi" <khalid7621 AT hotmail DOT com>
Cc: "Amanda List" <amanda-users AT amanda DOT org>
Sent: Thursday, June 30, 2005 9:32 AM
Subject: Re: driver: WARNING: got empty schedule from planner


> khalid maqsudi wrote:
> >
> > I was the one who asked the original question in the link below.  I've
> > compiled it using gcc 3 and even compiled 2.4.4p4 but I am getting the
same
> > error.  the amanda host and client are the same machine.  I was not able
> > figure out how to correct this.  My amanda project was put on hold
because
> > of this.
>
> But is it because planner core dumps or not?
> Which OS?
>
> And I didn't see a posting with the amdump.X file with eventuelly some
> useful clues either...
>
>
> -- 
> Paul Bijnens, Xplanation                            Tel  +32 16 397.511
> Technologielaan 21 bus 2, B-3001 Leuven, BELGIUM    Fax  +32 16 397.512
> http://www.xplanation.com/          email:  Paul.Bijnens AT xplanation DOT com
> ***********************************************************************
> * I think I've got the hang of it now:  exit, ^D, ^C, ^\, ^Z, ^Q, F6, *
> * quit,  ZZ, :q, :q!,  M-Z, ^X^C,  logoff, logout, close, bye,  /bye, *
> * stop, end, F3, ~., ^]c, +++ ATH, disconnect, halt,  abort,  hangup, *
> * PF4, F20, ^X^X, :D::D, KJOB, F14-f-e, F8-e,  kill -1 $$,  shutdown, *
> * kill -9 1,  Alt-F4,  Ctrl-Alt-Del,  AltGr-NumLock,  Stop-A,  ...    *
> * ...  "Are you sure?"  ...   YES   ...   Phew ...   I'm out          *
> ***********************************************************************
>